Jigs and fixtures
Industrial Hangar Steel Frame
- Bounding box
- 24800.0 × 13700.0 × 21139.8 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric industrial hangar steel frame. Overall dimensions: Length: 24,500 mm Width: 13,500 mm Side height: 20,425 mm Ridge height: 21,090 mm Divide the length into three bays: 8,000 mm, 8,000 mm and 8,500 mm. Provide: - Upper front movable gate 13,500 x 13,300 mm. - Lower front fixed section 7,000 mm high. - Two side movable gates 8,500 x 10,000 mm. - Central movable roof zone 8,000 x 14,000 mm. - Two fixed roof zones. - Side guide tracks and movable bottom beams.
Parameters
| Name | Value | Range |
|---|---|---|
| Total Length | 24500 mm | 15000 – 40000 |
| Total Width | 13500 mm | 8000 – 25000 |
| Eave Height | 20425 mm | 10000 – 30000 |
| Ridge Height | 21090 mm | 12000 – 35000 |
| Front Bay Length | 8000 mm | 4000 – 15000 |
| Central Bay Length | 8000 mm | 4000 – 15000 |
| Rear Bay Length | 8500 mm | 4000 – 15000 |
| Column Width (X) | 200 mm | 100 – 400 |
| Column Depth (Y) | 200 mm | 100 – 400 |
| Rafter Beam Side | 100 mm | 60 – 200 |
| Roof Cladding Thickness | 100 mm | 40 – 200 |
| Gate Thickness | 200 mm | 100 – 400 |
| Front Lower Section Height | 7000 mm | 4000 – 10000 |
| Front Upper Gate Height | 13300 mm | 6000 – 20000 |
| Side Gate Height | 10000 mm | 5000 – 15000 |
| Guide Rail Side | 50 mm | 30 – 100 |
| Bottom Beam Height | 150 mm | 80 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl