Jigs and fixtures
Industrial Building Floor Assembly
- Bounding box
- 40000.0 × 25000.0 × 3700.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a typical standard floor plan for an old industrial building in Hong Kong. The floor is rectangular, 40 meters long and 25 meters wide, with a landing height of 3.5 meters. In the center of the floor, create a rectangular core area of 10 meters by 8 meters. In this core, place 2-m intervals on the longer shaft. On one of the shorter sides, 2 stair shafts are placed, each 2.5 m wide and 4 m deep, the whole area surrounding the core is open space for flexible use (office, storage, or light industrial), keeping the model at a simple geometric volume, no doors or windows, no minor finishes, and an overall floor area of about 1000 m2.
Parameters
| Name | Value | Range |
|---|---|---|
| Floor Slab Length (X) | 40000 mm | 10000 – 100000 |
| Floor Slab Width (Y) | 25000 mm | 5000 – 50000 |
| Floor Slab Thickness | 200 mm | 100 – 500 |
| Core Length (X) | 10000 mm | 2000 – 20000 |
| Core Width (Y) | 8000 mm | 2000 – 20000 |
| Core Height (landing height) | 3500 mm | 2000 – 5000 |
| Stair Shaft Width (X dimension) | 4000 mm | 500 – 10000 |
| Stair Shaft Depth (Y dimension) | 2500 mm | 500 – 10000 |
| Stair Shaft Height | 3500 mm | 2000 – 5000 |
| Stair Shaft X Offset (from slab center) | 3000 mm | 0 – 10000 |
| Stair Shaft Y Offset (symmetry spacing) | 2000 mm | 0 – 8000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl