Mechanical parts
Indoor Fountain for a 20 cm Pot
- Bounding box
- 190 × 190 × 75.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a model of an indoor fountain to be 3D-printed. It should have a hose connection on the underside for a garden hose. The indoor fountain should be placed on top of a 20 cm pot. The design should give the impression that water is flowing from a spring into a stream.
Parameters
| Name | Value | Range |
|---|---|---|
| Basin diameter - sits on a 20 cm pot | 190 mm | 80 – 200 |
| Height of the basin rim | 50 mm | 25 – 120 |
| Basin wall thickness | 2.5 mm | 1.2 – 6 |
| Thickness of the solid basin floor | 10 mm | 4 – 30 |
| Diameter of the central spring mound | 48 mm | 20 – 100 |
| Height of the spring mound | 22 mm | 5 – 80 |
| Width of the spring stone | 66 mm | 25 – 120 |
| Water passage diameter | 12 mm | 5 – 25 |
| Garden hose socket diameter | 20 mm | 8 – 34 |
| Garden hose socket depth | 12 mm | 3 – 30 |
| Width of the carved stream | 16 mm | 6 – 40 |
| Depth of the carved stream | 4 mm | 1 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
Two-Joint Robotic Arm with Parallel Gripper
i want a 2 joint robotic arm with parallel gripper simple design. Servo-Base: smart/serial-bus servo, true 360° positional control. Turret rides on a bearing so the servo only driv
