Enclosures and housings
Inclined Gravity Roller Conveyor
- Bounding box
- 680.0 × 2019.6 × 1125.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric industrial inclined gravity roller conveyor for product discharge in an automated production line. MAIN DIMENSIONS: - Conveyor Length: 2000 mm, adjustable from 1000 to 3500 mm. - Usable Conveyor Width: 600 mm minimum, adjustable from 600 to 1000 mm. - Overall Frame Width: approximately 660 mm. - Conveyor Inclination Angle: 10 degrees, adjustable from 5 to 20 degrees. ROLLER SYSTEM: - Gravity roller conveyor, NOT a belt conveyor. - Cylindrical steel rollers. - Roller Diameter: 50 mm, adjustable from 40 to 80 mm. - Roller Spacing: 100 mm, adjustable from 80 to 150 mm. - Rollers must be positioned perpendicular to the conveyor length. - Each roller must span the full usable conveyor width. - Rollers must be evenly distributed along the entire conveyor length. - Rollers should be represented as individual cylindrical solids. - No motor or drive system required. SUPPORT STRUCTURE: - Two parallel longitudinal steel side frames. - Rectangular steel tube profiles. - Frame Tube Size: 40 x 40 mm, adjustable. - Strong industrial metal construction. - Simple cross-members connecting both side frames. SUPPORT LEGS: - Four vertical support legs. - Adjustable support heights to create the conveyor inclination. - Two upper legs and two lower legs. - Include horizontal cross-bracing for stability. - The conveyor must be inclined along its longitudinal axis. - Both sides must remain at the same height. HEIGHT: - High end height: 1100 mm. - Low end height: automatically adjusted according to conveyor length and inclination. - The inclination must be clearly visible in the 3D model. DESIGN REQUIREMENTS: - Realistic industrial gravity roller conveyor. - Minimum usable width of 600 mm. - No conveyor belt. - No side guards or covers. - No unnecessary mechanical details. - Keep geometry simple and lightweight for ABB RobotStudio. - Rollers, frame and legs should be separate solids. - All dimensions in millimeters. - Expose the main dimensions as editable parameters. - Exportable to STEP and STL. - This model is intended for industrial robot simulation, not manufacturing certification.
Parameters
| Name | Value | Range |
|---|---|---|
| Conveyor Length (along incline) | 2000 mm | 1000 – 3500 |
| Usable Width (roller length) | 600 mm | 600 – 1000 |
| Incline Angle | 10 deg | 5 – 20 |
| High End Frame Top Height | 1100 mm | 600 – 2000 |
| Roller Diameter | 50 mm | 40 – 80 |
| Roller Pitch | 100 mm | 80 – 150 |
| Frame Tube Size (square) | 40 mm | 30 – 60 |
| Leg Inset from Frame Ends | 40 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no