Enclosures and housings
Incinerator Shade Enclosure with Perimeter Fence
- Bounding box
- 10200 × 15100 × 6528 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
The shade size: A minimum of 8m * 8 with 6 m ceiling height or equivalent dimensions as per the arrangement of the incinerator. Entrance door: One 3 meter wide and 2.4 long entrance door made from 12 to 15 mm thick steel Wall: Pointed hollow concrete block masonry up to 3.0 m high, topped with galvanised steel welded wire mesh fencing (minimum 2.0 mm wire diameter and 50 * 50 mm mesh openings), securely fixed to steel posts. Access ramp: construct minimum 6 meters long and 2-meter-wide ramp access to the incinerator. Fence: 40m perimeter fencing with 40 x40x5mm angle iron stand at 1500mm c/c to height of 2000mm above ground level with 400mm deep concrete foundation and braced with covered with approved quality chain link wire mesh.
Parameters
| Name | Value | Range |
|---|---|---|
| Footprint side length | 8000 mm | 4000 – 12000 |
| Masonry wall height | 3000 mm | 1500 – 4500 |
| Hollow block wall thickness | 200 mm | 100 – 400 |
| Roof / ceiling height | 6000 mm | 3000 – 9000 |
| Welded mesh wire diameter | 2 mm | 1.5 – 5 |
| Welded mesh opening pitch | 50 mm | 20 – 100 |
| Mesh support post square size | 60 mm | 40 – 120 |
| Door width | 3000 mm | 900 – 4000 |
| Door height | 2400 mm | 1800 – 3000 |
| Steel plate thickness | 14 mm | 12 – 15 |
| Ramp length | 6000 mm | 2000 – 12000 |
| Ramp width | 2000 mm | 1000 – 4000 |
| Ramp height at the door | 150 mm | 40 – 600 |
| Roof slab thickness | 100 mm | 50 – 300 |
| Roof overhang per side | 200 mm | 0 – 1000 |
| Fence perimeter | 40000 mm | 20000 – 80000 |
| Fence height above ground | 2000 mm | 1000 – 3000 |
| Angle iron leg size | 40 mm | 25 – 80 |
| Angle iron leg thickness | 5 mm | 2 – 10 |
| Maximum post centres | 1500 mm | 800 – 3000 |
| Concrete foundation depth | 400 mm | 200 – 800 |
| Concrete foundation block | 200 mm | 120 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
