Enclosures and housings
Impact Test Bumper Set
- Bounding box
- 815.7 × 60 × 35 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
I need to create bumpers for my science fair project, I will be using it to dest the collison and it will be measuered by the highest accleratation. The bumpers have to be the same size, material, and be tested on the same conditions. I need a Solid bumper, ribed, honeycomb, lattice, and a foamfilled, They can't be too complex since im going to attatch them to a wooden block with wheels.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 120 mm | 60 – 200 |
| Height | 60 mm | 30 – 120 |
| Depth | 35 mm | 20 – 80 |
| Rear plate thickness | 5 mm | 2 – 10 |
| Front face chamfer | 1.5 mm | 0 – 5 |
| Rib width | 5 mm | 2 – 12 |
| Rib centre spacing | 15 mm | 8 – 40 |
| Side margin | 5 mm | 2 – 20 |
| Cell across-flats | 10 mm | 5 – 25 |
| Cell wall thickness | 2 mm | 1.2 – 6 |
| Perimeter frame width | 4 mm | 2 – 12 |
| Strut thickness | 5 mm | 2 – 10 |
| Cells across (count) | 6 mm | 2 – 12 |
| Cells high (count) | 3 mm | 1 – 8 |
| Shell wall thickness | 4 mm | 2 – 10 |
| Foam insert clearance | 0.3 mm | 0.1 – 1 |
| Foam insert corner radius | 4 mm | 1 – 10 |
| Spacing between part centres | 140 mm | 130 – 250 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
