Enclosures and housings
Hydraulic Quick-Connect Protective Cover and Plug Set
- Bounding box
- 124.8 × 17.5 × 94.5 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design two axisymmetric parts for 3D printing on a Bambu Lab P1S: a flexible TPU 95A protective cover for a hydraulic quick‑connect male coupling, and a rigid PETG sealing plug for the matching female coupling bore. The couplers are STAUFF QRC‑HUS‑25 push‑pull quick‑connects (DN25, G1" BSPP), but dimensions should follow the measurements and clearances below rather than generic catalog values. The goal is good mechanical fit and dirt/moisture protection, not pressure sealing.
Parameters
| Name | Value | Range |
|---|---|---|
| Cover Inner Diameter | 25 mm | 15 – 35 |
| Cover Wall Thickness | 2 mm | 0.8 – 5 |
| Cover Overall Length | 45 mm | 30 – 60 |
| Cover Lip Radial Thickness | 1 mm | 0.3 – 3 |
| Cover Lip Axial Length | 2 mm | 0.5 – 5 |
| Cover Lip Distance from Open End | 5 mm | 1 – 15 |
| Plug Outer Diameter | 25 mm | 20 – 35 |
| Plug Insertion Depth | 30 mm | 15 – 40 |
| Plug Flange Diameter | 35 mm | 26 – 50 |
| Plug Flange Thickness | 5 mm | 2 – 10 |
| Plug Groove Width | 3 mm | 1 – 6 |
| Plug Groove Depth | 1.5 mm | 0.3 – 3 |
| Plug Groove Center from Tip | 10 mm | 5 – 20 |
| Plug Tip Chamfer | 1.5 mm | 0.2 – 5 |
| Layout Gap | 60 mm | 30 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no