Enclosures and housings
Hydraulic Basket Press Frame Assembly
- Bounding box
- 2075.0 × 920.0 × 1100.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- October 27, 2026
Download
Free to download and use. See the terms.
The prompt
Steel frame machine, units mm, Z up. Frame: 1400x800x1100, 50x50x3 square tube, 4 corner posts with foot plates, base rails at z=150. Chamber: open-top perforated basket 1000x500x450, 2.5 wall, centered in frame, bottom at z=300, with a rim flange 50 wide x 8 thick on top. Top grate: 1000x500x25, bars 6 wide at 36 pitch along the short side, 20 wide border. 4 vertical hydraulic cylinders, 50 dia barrel, 25 dia rod, one at each chamber corner, standing on base rails and pushing up on the rim flange. Power unit: 500x400x600 box 100 beyond the frame end, with a 160 dia x 250 motor and a 150x200x120 pump block on top. Control panel: 70x200x250 box on a post outer face.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length (X) | 1400 mm | 800 – 3000 |
| Frame Width (Y) | 800 mm | 500 – 2000 |
| Frame Height (Z) | 1100 mm | 500 – 2500 |
| Square Tube Size | 50 mm | 20 – 120 |
| Foot Plate Size | 150 mm | 60 – 300 |
| Foot Plate Thickness | 10 mm | 3 – 30 |
| Base Rail Height (z) | 150 mm | 40 – 600 |
| Basket Length (X) | 1000 mm | 300 – 2000 |
| Basket Width (Y) | 500 mm | 200 – 1500 |
| Basket Height (Z) | 450 mm | 150 – 1200 |
| Basket Wall Thickness | 2.5 mm | 1 – 10 |
| Basket Bottom Height | 300 mm | 60 – 900 |
| Rim Flange Width | 50 mm | 15 – 120 |
| Rim Flange Thickness | 8 mm | 3 – 30 |
| Perforation Diameter | 20 mm | 4 – 40 |
| Perforation Pitch | 60 mm | 15 – 150 |
| Grate Thickness | 25 mm | 8 – 80 |
| Grate Bar Width | 6 mm | 2 – 30 |
| Grate Bar Pitch | 36 mm | 8 – 150 |
| Grate Border Width | 20 mm | 5 – 80 |
| Cylinder Barrel Diameter | 50 mm | 20 – 200 |
| Cylinder Rod Diameter | 25 mm | 8 – 100 |
| Cylinder Barrel Length | 400 mm | 100 – 900 |
| Power Unit Length | 500 mm | 200 – 1200 |
| Power Unit Width | 400 mm | 150 – 1000 |
| Power Unit Height | 600 mm | 200 – 1500 |
| Offset Beyond Frame End | 100 mm | 0 – 500 |
| Motor Diameter | 160 mm | 60 – 400 |
| Motor Length | 250 mm | 80 – 700 |
| Pump Block Length | 150 mm | 50 – 400 |
| Pump Block Width | 200 mm | 50 – 500 |
| Pump Block Height | 120 mm | 40 – 400 |
| Panel Depth | 70 mm | 20 – 250 |
| Panel Width | 200 mm | 60 – 600 |
| Panel Height | 250 mm | 80 – 700 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no