Enclosures and housings
Hushållsost Cheese Case
- Bounding box
- 152.5 × 150 × 121 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
I want to design a case/cover for cheese, specifically for hushållsost you can buy in Sweden, the circular one. Here are the features: 1. It should be made from wood (such as bamboo) or another sustainable material. Ideally, it is a moonomaterial for easy recycling. 2. The cheese should fit perfectly at the base without wiggling so that the user can easily use a osthyvel and slice the cheese with ease. 3. There should be some design where users can put their hand at some spot on the case for stability as they are slicing the cheese, but there should be no need for the fingers/hand to have direct contact with the cheese. 3. Users should be able to lift it and pass the cheese in the case with only one hand. 4. There should be a mechanism to raise the cheese, so that when the cheese gets smaller as you slice it, the edges of the case/cover does not prevent the user from getting a good slice of cheese. 4.a. One idea is to use the lid of the case as a mechanism to raise it-- so you press the lid down and the platform gets raised. This is just an idea; other ideas (if better) are welcome. The important part is that it is durable, simple, and doesn't have many parts as it should be easily and cheaply manufactured. 5. As hushållsost is a family cheese, it should have no sharp edges so that kids do not get injured.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 140 mm | 100 – 200 |
| Inner diameter | 126 mm | 90 – 190 |
| Height | 85 mm | 60 – 150 |
| Bottom thickness | 8 mm | 4 – 15 |
| Edge rounding | 4 mm | 0 – 8 |
| Platform diameter | 124.5 mm | 100 – 150 |
| Platform thickness | 10 mm | 5 – 20 |
| Centering rim height | 3 mm | 1 – 6 |
| Cheese recess diameter | 122 mm | 100 – 140 |
| Wedge length | 100 mm | 80 – 150 |
| Wedge width | 25 mm | 15 – 40 |
| Wedge base thickness | 15 mm | 10 – 25 |
| Wedge lift height | 60 mm | 30 – 80 |
| Wedge angle - not used directly, 45° assumed | 45 deg | 30 – 60 |
| Slot clearance | 0.5 mm | 0.2 – 1 |
| Lid diameter | 145 mm | 110 – 180 |
| Lid thickness | 16 mm | 8 – 30 |
| Handle diameter | 30 mm | 20 – 50 |
| Handle height | 20 mm | 10 – 40 |
| Handle rounding | 5 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,