Brackets and mounts
Humidity Indicator Jar
- Bounding box
- 84 × 84 × 120.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 24
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of a small glass-style storage jar with a passive humidity warning mechanism in the lid. Cylindrical jar, 80 mm outer diameter, 100 mm tall, 3 mm wall, open top. Flat round lid, 84 mm diameter, 6 mm thick, with a 6 mm centre hole. Under the lid, a small mounting block holds a thin vertical two-layer strip, a thin lever beside it, and a shallow curved dome strip. A thin vertical pin passes through the lid hole and carries a small rectangular red flag on top. Clean, simple, realistic proportions, no decorative details, no text.
Parameters
| Name | Value | Range |
|---|---|---|
| Jar outer diameter | 80 mm | 40 – 150 |
| Jar height | 100 mm | 40 – 250 |
| Jar wall thickness | 3 mm | 1.2 – 6 |
| Lid diameter | 84 mm | 50 – 180 |
| Lid thickness | 6 mm | 2 – 15 |
| Lid centre hole diameter | 6 mm | 2 – 12 |
| Block length | 24 mm | 10 – 60 |
| Block width | 14 mm | 6 – 40 |
| Block height | 10 mm | 4 – 25 |
| Strip length | 18 mm | 8 – 45 |
| Strip width | 6 mm | 3 – 20 |
| Strip total thickness, 2 bonded layers | 1 mm | 0.6 – 3 |
| Lever length | 15 mm | 6 – 40 |
| Lever width | 3 mm | 1.5 – 12 |
| Lever thickness | 1 mm | 0.6 – 3 |
| Dome strip length | 20 mm | 8 – 45 |
| Dome strip width | 8 mm | 4 – 25 |
| Dome strip thickness | 0.5 mm | 0.35 – 2 |
| Dome curvature radius | 60 mm | 30 – 200 |
| Pin diameter | 2 mm | 1 – 6 |
| Pin length | 30 mm | 10 – 60 |
| Flag length | 12 mm | 5 – 30 |
| Flag height | 6 mm | 3 – 20 |
| Flag thickness | 1 mm | 0.6 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl