Enclosures and housings
Hot Wheels Magnetic Drift Pad (300 x 250 x 100 mm, 2+2+1 parts)
- Bounding box
- 300.0 × 250.0 × 105.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a Hot Wheels magnetic drift pad, assembled size 300 × 250 × 100 mm. Make TWO separate enclosure halves, each 150 × 250 × 100 mm. They must slide/snap-lock together along the 150 mm center joint. When connected, they must form ONE continuous open box with no internal wall, divider, ridge, or obstruction at the joint. Create a rectangular removable TOP COVER covering the full 300 × 250 mm assembled box. Because of the Bambu A1 256 mm limit, split the top into TWO 150 × 250 mm plates that mechanically slide/snap together and form one flat continuous top with no visible raised joint. Create ONE separate circular rotating disc, exactly 200 mm diameter and 5 mm thick, positioned underneath the top. Add a central motor hub and evenly spaced magnet pockets. No screws, bolts, nuts, or glue. Use slide-fit/dovetail joints and snap-locks. Use practical FDM clearances. All four main printable parts must be separate CAD bodies: left enclosure, right enclosure, left top plate, right top plate, plus the separate 200 mm rotating disc. Every part must fit within 256 × 256 × 256 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Assembled Box Width | 300 mm | 100 – 600 |
| Box Depth | 250 mm | 100 – 600 |
| Box Height | 100 mm | 30 – 300 |
| Wall Thickness | 4 mm | 2 – 12 |
| Dovetail Tongue Length | 8 mm | 3 – 25 |
| Dovetail Flare (Undercut) | 8 mm | 0 – 25 |
| Snap Detent Diameter | 3 mm | 1 – 8 |
| Snap Detent Length | 10 mm | 4 – 40 |
| Top Plate Thickness | 5 mm | 2 – 15 |
| Top Plate Snap Peg Diameter | 4 mm | 2 – 10 |
| Rotating Disc Diameter | 200 mm | 50 – 250 |
| Rotating Disc Thickness | 5 mm | 2 – 20 |
| Disc Center Height (Z) | 90 mm | 10 – 200 |
| Motor Hub Diameter | 30 mm | 10 – 120 |
| Motor Hub Height Below Disc | 20 mm | 5 – 80 |
| Motor Shaft Diameter | 12 mm | 4 – 40 |
| Magnet Pocket Count | 12 mm | 4 – 24 |
| Magnet Pocket Diameter | 12 mm | 5 – 30 |
| Magnet Pocket Ring Radius | 80 mm | 20 – 115 |
| Magnet Pocket Depth | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no