Enclosures and housings
Hot-Stamping Shuttle Bed Assembly
- Bounding box
- 2900.0 × 400.0 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete 3D mechanical assembly model of an industrial hot-stamping shuttle bed mechanism consisting of three distinct, non-fused geometric components designed for linear motion simulation. Component 1 is a stationary foundation bed track measuring 1200mm long, 400mm wide, and 40mm thick, featuring two parallel, raised rectangular guide rails running along its entire 1200mm length to act as fixed tracks. Component 2 is a mobile multi-cavity nesting plate measuring 700mm long, 350mm wide, and 50mm thick, positioned flat on top of the foundation bed tracks between the guide rails. The top face of this plate contains an array of five identical parallel rectangular pocket nests cut side-by-side across its length, with each pocket measuring 250mm long, 50mm wide, and 25mm deep. Component 3 is a solid cylindrical actuator rod with a 30mm diameter and 600mm length, aligned collinearly with the sliding path and mated flush to the center back-face of the multi-cavity plate to act as the driving piston link. All three components must remain as individual, independent solid bodies with zero geometric interference, allowing linear sliding freedom along the longitudinal axis of the tracks for kinematic motion analysis.
Parameters
| Name | Value | Range |
|---|---|---|
| Bed Length | 1200 mm | 600 – 2400 |
| Bed Width | 400 mm | 200 – 800 |
| Bed Thickness | 40 mm | 20 – 100 |
| Rail Width | 20 mm | 10 – 50 |
| Rail Height | 20 mm | 10 – 50 |
| Plate Length | 700 mm | 300 – 1200 |
| Plate Width | 350 mm | 150 – 700 |
| Plate Thickness | 50 mm | 20 – 120 |
| Pocket Count | 5 | 1 – 10 |
| Pocket Length | 250 mm | 50 – 650 |
| Pocket Width | 50 mm | 10 – 150 |
| Pocket Depth | 25 mm | 5 – 48 |
| Rod Diameter | 30 mm | 10 – 80 |
| Rod Length | 600 mm | 100 – 1500 |
| Layout Gap | 200 mm | 50 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no