Mechanical parts
Hooded Launcher Pivot Assembly
- Bounding box
- 457.2 × 457.2 × 397.6 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Make it the same as the original I showed you, but replace the flower scoring and vertical lift and hive scoring arm with a pivot and launcher with a hood that helps angle and position where we want to shoot. ( HIVE ↑ ┌─────┐ │ ○○○ │ └──┬──┘ ╱ ┌────╱────┐ │ LAUNCHER│ └────╱────┘ ● ← pivot ┌───────────────┐ │ 4-PC HOPPER │ │ ○ ○ ○ ○ │ ├───────────────┤ │ INTAKE │ └───────────────┘ ◉ ◉ ◉ ◉ 18" × 18")
Parameters
| Name | Value | Range |
|---|---|---|
| Footprint X | 457.2 mm | 300 – 600 |
| Footprint Y | 457.2 mm | 300 – 600 |
| Base Thickness | 12.7 mm | 5 – 25 |
| Mount Hole Diameter | 8 mm | 4 – 20 |
| Mount Hole Offset | 30 mm | 10 – 80 |
| Pivot X Offset | 70 mm | 30 – 150 |
| Pivot Height | 70 mm | 40 – 120 |
| Pivot Width | 90 mm | 50 – 160 |
| Pivot Depth | 90 mm | 50 – 160 |
| Pivot Bore Diameter | 12 mm | 6 – 30 |
| Arm Length | 360 mm | 200 – 500 |
| Arm Width | 80 mm | 40 – 140 |
| Arm Height | 50 mm | 30 – 100 |
| Arm Angle | 45 deg | 20 – 80 |
| Hood Length | 110 mm | 60 – 180 |
| Hood Thickness | 8 mm | 4 – 20 |
| Hood Angle Offset | 18 deg | 0 – 45 |
| Hopper Length | 300 mm | 200 – 400 |
| Hopper Depth | 120 mm | 80 – 200 |
| Hopper Height | 100 mm | 60 – 160 |
| Pocket Diameter | 65 mm | 40 – 100 |
| Pocket Depth | 40 mm | 10 – 100 |
| Pocket Count | 4 count | 2 – 6 |
| Intake Length | 220 mm | 120 – 350 |
| Intake Depth | 320 mm | 200 – 450 |
| Intake Height | 80 mm | 40 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con