Enclosures and housings
HONOR P70 Pro Matte Black Phone Case
- Bounding box
- 78.5 × 166.0 × 11.2 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
A matte black protective phone case for the HONOR P70 Pro. Full-body all-black design, uniform black color across the entire shell including the back panel, side frames, and camera cutout. Slim and lightweight hard-shell form factor with rounded corners. Precise cutouts for the rear camera module (multi-lens rectangular island), side buttons, charging port, speaker grille, and fingerprint sensor area. Slightly raised lip around the camera and screen edges for protection. Smooth matte finish, no logo, no text, no patterns, no gloss accents. Single solid part, uniform wall thickness of about 1.5 mm, designed as a manufacturable injection-molded or 3D-printable shell.
Parameters
| Name | Value | Range |
|---|---|---|
| Phone Width | 75.5 mm | 60 – 95 |
| Phone Length | 163 mm | 130 – 190 |
| Phone Thickness | 8.2 mm | 5 – 12 |
| Wall Thickness | 1.5 mm | 1 – 3 |
| Outer Corner Radius | 10 mm | 3 – 20 |
| Raised Screen Lip | 0.8 mm | 0 – 2 |
| Camera Cutout Width | 44 mm | 15 – 60 |
| Camera Cutout Height | 40 mm | 15 – 60 |
| Camera Cutout Corner Radius | 8 mm | 1 – 20 |
| Camera Margin From Top | 22 mm | 5 – 45 |
| Camera Offset X | 0 mm | -30 – 30 |
| Camera Bezel Height | 0.7 mm | 0 – 2 |
| Camera Bezel Width | 1.5 mm | 0.5 – 4 |
| Volume Button Cutout Length | 20 mm | 8 – 35 |
| Volume Button Position Y | 34 mm | -60 – 60 |
| Power Button Cutout Length | 14 mm | 8 – 30 |
| Power Button Position Y | 8 mm | -60 – 60 |
| Button Cutout Height | 6 mm | 3 – 9 |
| Fingerprint Cutout Length | 10 mm | 5 – 20 |
| Fingerprint Cutout Position Y | -16 mm | -60 – 60 |
| Fingerprint Cutout Height | 4 mm | 2 – 8 |
| Charging Port Cutout Width | 16 mm | 8 – 30 |
| Charging Port Cutout Height | 7 mm | 3 – 10 |
| Speaker Cutout Width | 14 mm | 4 – 25 |
| Speaker Cutout Height | 3 mm | 1.5 – 6 |
| Speaker Cutout Offset X | 22 mm | -35 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
