Brackets and mounts
Hollow Tube Mounting Block
- Bounding box
- 42.0 × 42.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 4
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a vertical rectangular hollow tube mounting block, 100 mm tall along the Z-axis. The inner hollow cutout is exactly 30.5 mm by 30.5 mm with sharp 90-degree inner corners, passing completely through the full 100 mm height from top to bottom. The outer wall thickness is 6 mm on all four sides, making the total outer dimensions 42 mm by 42 mm by 100 mm. Drill a single 8.5 mm diameter through-hole centered horizontally and vertically (at Z = 50 mm) passing straight through the front and back walls along the Y-axis for an M8 bolt. Keep all exterior edges flat and clean without fillets.
Parameters
| Name | Value | Range |
|---|---|---|
| Total Height | 100 mm | 20 – 300 |
| Outer Width/Depth | 42 mm | 32 – 100 |
| Inner Cutout Width | 30.5 mm | 10 – 90 |
| Mounting Hole Diameter | 8.5 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
