Enclosures and housings
Hollow Tapered Reservoir
- Bounding box
- 152.5 × 130.6 × 156.3 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create one hollow reservoir as a single CAD solid. Overall height: 150 mm. Top outer size: 140 mm wide × 120 mm deep. From Z=0 to Z=50 mm create a straight lower rectangular body 115 mm wide × 50 mm deep. From Z=50 to Z=150 mm enlarge the body progressively to the top size 140 × 120 mm. Keep the rear wall completely flat and vertical from bottom to top. The side walls and front wall expand outward only above Z=50 mm. Wall thickness: 5 mm. Top completely open. Bottom closed, thickness 5 mm. On the flat rear wall cut two horizontal through-slots. Each slot: 103 mm wide × 3.8 mm high. Both slots centered horizontally. Lower slot center height: Z=101 mm. Upper slot center height: Z=117 mm. Add one Ø12 mm through drain hole in the bottom. Do not add lid, rollers, belt, motor, supports or other parts. Generate only the CAD model.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 150 mm | 100 – 300 |
| Lower Body Height | 50 mm | 20 – 150 |
| Lower Body Width (X) | 115 mm | 50 – 200 |
| Lower Body Depth (Y) | 50 mm | 20 – 150 |
| Top Outer Width (X) | 140 mm | 80 – 300 |
| Top Outer Depth (Y) | 120 mm | 80 – 300 |
| Wall Thickness | 5 mm | 1 – 20 |
| Bottom Thickness | 5 mm | 1 – 20 |
| Slot Width (X) | 103 mm | 20 – 130 |
| Slot Height (Z) | 3.8 mm | 1 – 10 |
| Lower Slot Center Z | 101 mm | 51 – 149 |
| Upper Slot Center Z | 117 mm | 52 – 149.9 |
| Drain Hole Ø | 12 mm | 2 – 40 |
| Drain Hole X Position | 0 mm | -50 – 50 |
| Drain Hole Y Position | 25 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no