Hollow Tapered Rectangular Reservoir

Create a hollow tapered rectangular reservoir from scratch. Overall external dimensions: 140 mm wide × 120 mm deep × 150 mm high. Use 5 mm wall thickness. The wall facing the mating component must be flat and vertical. Keep the other reservoir walls tapered toward the bottom while maintaining the 140 × 120 mm maximum top envelope. Create a large open access area at the top for easy manual access to the internal belt. Create the reservoir as one watertight hollow solid with an open top. On the flat mating wall create two horizontal rectangular through-slots for a belt. Both slots must be centered horizontally on this wall. Slot width: 103 mm. Slot height: 3.8 mm. Lower slot vertical limits: Z = 99.1 mm to Z = 102.9 mm. Upper slot vertical limits: Z = 115.1 mm to Z = 118.9 mm. Maintain exactly 16 mm center-to-center vertical spacing between the two slots. Include a bottom drain opening, centered as in the reservoir geometry, suitable for emptying the liquid without moving the reservoir. Preserve a distinct upper dry zone above the liquid reservoir area. Do not add rollers, belt, motor, blades, supports or external components. Generate only the reservoir CAD solid.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.