Enclosures and housings
Hollow Reservoir with Roller R1
- Bounding box
- 173.0 × 70.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric hollow reservoir. Units: mm. Coordinate system: X = width Y = depth Z = height RESERVOIR Overall width X = 120. Overall height Z = 180. Keep the front vertical face flat at Y=0. The reservoir expands only in +Y. External depth profile: - Z=0: Y=20 - Z=100: Y=22 - Z=180: Y=70 Create continuous planar transitions between these profiles. Wall thickness = 3. Bottom thickness = 4. Top open. Create two horizontal rounded through-slots on the flat Y=0 face. Each slot: - width X = 103 - height Z = 3.8 - horizontally centered Slot center heights: - lower slot Z = 132 - upper slot Z = 148 ROLLER R1 Create one separate cylindrical roller inside the lower reservoir zone. - diameter = 8 - length = 106 - axial bore = 3.4 - axis parallel to X - axis height Z = 14 - centered along X - center the roller axis inside the local internal Y depth The roller must remain a separate solid body and must not merge with the reservoir. Keep the reservoir dimensions, slots and roller dimensions parametric. Do not add roller supports, pins, second roller, motor, cover, drain or other features.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width X | 120 mm | 40 – 300 |
| Overall height Z | 180 mm | 40 – 400 |
| External depth at Z=0 | 20 mm | 5 – 150 |
| External depth at Z=100 | 22 mm | 5 – 170 |
| External depth at Z=180 | 70 mm | 10 – 250 |
| Height of mid depth point | 100 mm | 10 – 380 |
| Wall thickness | 3 mm | 1 – 15 |
| Bottom thickness | 4 mm | 1 – 20 |
| Slot overall width X | 103 mm | 10 – 280 |
| Slot height Z | 3.8 mm | 1 – 20 |
| Lower slot center Z | 132 mm | 10 – 330 |
| Upper slot center Z | 148 mm | 10 – 360 |
| Roller R1 outer dia | 8 mm | 2 – 40 |
| Roller R1 length (X) | 106 mm | 5 – 260 |
| Roller R1 bore dia | 3.4 mm | 0.5 – 30 |
| Roller R1 axis height Z | 14 mm | 1 – 170 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no