Enclosures and housings
Hollow Reservoir with Offset Roller R1
- Bounding box
- 120.0 × 70.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify only Roller R1. Keep: - diameter 8 mm - length 106 mm - axial bore 3.4 mm - axis parallel to X - axis height Z = 14 mm - current Y position Move the roller center to X = 60 mm. The roller must extend from X = 7 mm to X = 113 mm. The roller must remain a completely separate solid body. Do not fuse or intersect it with the reservoir. Do not modify the reservoir, slots or any other geometry. Do not add supports or other components.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width X | 120 mm | 60 – 300 |
| Overall height Z | 180 mm | 60 – 400 |
| External depth at Z=0 | 20 mm | 5 – 200 |
| External depth at Z mid | 22 mm | 5 – 200 |
| Height of mid depth point | 100 mm | 10 – 380 |
| External depth at Z=H | 70 mm | 5 – 250 |
| Wall thickness | 3 mm | 1 – 15 |
| Bottom thickness | 4 mm | 1 – 20 |
| Slot width X | 103 mm | 10 – 280 |
| Slot height Z | 3.8 mm | 1 – 30 |
| Lower slot centre Z | 132 mm | 5 – 390 |
| Upper slot centre Z | 148 mm | 5 – 390 |
| Roller diameter R1 | 8 mm | 2 – 60 |
| Roller length R1 | 106 mm | 10 – 290 |
| Roller axial bore R1 | 3.4 mm | 0 – 50 |
| Roller axis height Z | 14 mm | 1 – 390 |
| Roller centre X | 60 mm | -150 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no