Enclosures and housings
Hollow Reservoir
- Bounding box
- 147.6 × 156.3 × 159.5 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create one hollow reservoir as a single solid. Use Z as vertical axis. Overall height: 150 mm. Maximum top size: 140 mm in X and 120 mm in Y. From Z=0 to Z=50 mm create a straight rectangular lower body, 115 mm wide in X and 50 mm deep in Y. Position it from X=-57.5 to +57.5 mm and from Y=+10 to +60 mm. From Z=50 to Z=150 mm smoothly flare the body outward. At Z=150 the outer profile must be X=-70 to +70 mm and Y=-60 to +60 mm. Use a smooth lofted transition, not a straight linear taper. Keep the rear mating wall at Y=+60 mm perfectly flat and vertical for the full height. Only the two side walls and the front wall expand outward above Z=50 mm. Shell the body inward with 5 mm wall thickness and leave the entire top open. Keep a 5 mm bottom thickness. Add one vertical through drain hole Ø12 mm in the bottom, centered at X=0, Y=35 mm. On the flat rear wall at Y=+60 mm create two horizontal rectangular through-slots, cut only through the 5 mm rear wall. Each slot is 103 mm wide in X and 3.8 mm high in Z, centered at X=0. Lower slot center: Z=101 mm. Upper slot center: Z=117 mm. Slot center spacing: 16 mm. Do not add a lid, rollers, belt, supports, motor or any other component. Generate only this reservoir CAD solid.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 150 mm | 100 – 200 |
| Lower Body Height | 50 mm | 20 – 100 |
| Lower Body Width X | 115 mm | 60 – 150 |
| Lower Body Front Y | 10 mm | -20 – 50 |
| Rear Wall Y | 60 mm | 40 – 100 |
| Top Width X | 140 mm | 80 – 200 |
| Top Front Y | -60 mm | -100 – 0 |
| Wall Thickness | 5 mm | 2 – 10 |
| Drain Hole Diameter | 12 mm | 4 – 30 |
| Drain Hole Center X | 0 mm | -50 – 50 |
| Drain Hole Center Y | 35 mm | 0 – 60 |
| Slot Width X | 103 mm | 50 – 130 |
| Slot Height Z | 3.8 mm | 2 – 10 |
| Lower Slot Center Z | 101 mm | 80 – 120 |
| Upper Slot Center Z | 117 mm | 100 – 140 |
| Slot Cut Depth Y | 6 mm | 3 – 12 |
| Slot Center X | 0 mm | -20 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no