Enclosures and housings
Hollow dome with viewing cutout and aligned pin holes
- Bounding box
- 60.1 × 60.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a hollow dome shell with an external diameter of 60mm and a wall thickness of 3mm. Cut a wide horizontal viewing cutout across the front face that spans 40mm wide and 25mm high. Model a 5mm diameter vertical pin hole through the top internal roof, and a matching 5mm diameter pin hole through the bottom floor, making sure they line up perfectly on the central Z-axis.
Parameters
| Name | Value | Range |
|---|---|---|
| External Diameter | 60 mm | 50 – 80 |
| Wall Thickness | 3 mm | 1 – 5 |
| Cutout Width | 40 mm | 20 – 50 |
| Cutout Height | 25 mm | 10 – 30 |
| Cutout Z Centre | 17.5 mm | 5 – 25 |
| Pin Hole Diameter | 5 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox