Enclosures and housings
hollow_box_with_features
- Bounding box
- 250.0 × 325.0 × 290.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
> Generate a hollow rectangular box with outer dimensions of 285mm height, 175mm width, and 225mm depth, with a uniform wall thickness of 15mm. Apply a 10mm fillet to the four edges of the front face. Perform the following extruded cuts through the walls: On the front face, cut a 120mm diameter circle centered 110mm from the bottom, a 45mm diameter circle centered 220mm from the bottom, and two 25mm diameter circles positioned 35mm from the bottom and 90mm apart. On the back face, cut a rectangular pocket 250mm tall and 145mm wide. On the left face, cut a 20mm diameter circle centered 50mm from the front edge and 142.5mm from the bottom. On the bottom face, add four solid cylindrical extrusions 15mm in diameter and 5mm tall, placed 20mm inward from each corner. >
Parameters
| Name | Value | Range |
|---|---|---|
| Outer height | 285 mm | 50 – 500 |
| Outer width | 175 mm | 50 – 500 |
| Outer depth | 225 mm | 50 – 500 |
| Wall thickness | 15 mm | 1 – 50 |
| Front face fillet radius | 10 mm | 0 – 50 |
| Front top large hole diameter | 120 mm | 1 – 300 |
| Large hole center from bottom | 110 mm | 0 – 500 |
| Front upper hole diameter | 45 mm | 1 – 300 |
| Upper hole center from bottom | 220 mm | 0 – 500 |
| Front lower hole diameter | 25 mm | 1 – 300 |
| Lower hole center from bottom | 35 mm | 0 – 500 |
| Lower holes spacing | 90 mm | 0 – 300 |
| Back pocket width | 145 mm | 1 – 500 |
| Back pocket height | 250 mm | 1 – 500 |
| Left hole diameter | 20 mm | 1 – 100 |
| Left hole center from front | 50 mm | 0 – 500 |
| Left hole center from bottom | 142.5 mm | 0 – 500 |
| Bottom boss diameter | 15 mm | 1 – 100 |
| Bottom boss height | 5 mm | 1 – 20 |
| Boss inward offset from corner | 20 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no