Enclosures and housings
Hinged Box - Body + Lid (Exploded)
- Bounding box
- 190.0 × 70.0 × 63.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 16, 2026
Download
Free to download and use. See the terms.
The prompt
Design a 3D-printable hinged box, 2 separate bodies (body + lid). Units: mm. BODY: - Open-top box, outer 80 (X) x 60 (Y) x 60 (Z), wall and floor thickness 3. - On the OUTSIDE of the back wall (the 80 mm side at Y=60), add 2 hinge knuckles, centered 15 mm from each end. - Each knuckle: cylinder along X, outer diameter 10, length 10, hole diameter 5.4, axis at Y=65, Z=57, joined to the back wall with a small rib. LID: - Plate 80 x 60 x 3 sitting on the rim (Z=60 to 63), extended 8 mm past the back wall. - On its underside, 2 tabs next to the knuckles (beside them along X, not overlapping), each 3 thick, reaching down to the hinge axis. - Each tab has a pin along X, diameter 5, passing through its knuckle and sticking out 6 mm. - Alignment lip on the lid underside: 2 wide, 2 deep, fits inside the box opening with 0.3 clearance. Keep the pins plain cylinders (no threads). Expose width, length, height, wall thickness, knuckle and pin diameters as parameters.
Parameters
| Name | Value | Range |
|---|---|---|
| Box Width (X) | 80 mm | 40 – 200 |
| Box Depth (Y) | 60 mm | 30 – 150 |
| Box Height (Z) | 60 mm | 20 – 150 |
| Wall / Floor Thickness | 3 mm | 1.2 – 10 |
| Knuckle Outside Diameter | 10 mm | 5 – 25 |
| Knuckle Length (X) | 10 mm | 3 – 40 |
| Knuckle Bore Diameter | 5.4 mm | 2 – 20 |
| Hinge Axis Height (Z) | 57 mm | 10 – 120 |
| Knuckle Centre from Box End | 15 mm | 5 – 60 |
| Support Rib Width (X) | 8 mm | 2 – 30 |
| Support Rib Height (Z) | 12 mm | 2 – 40 |
| Lid Plate Thickness | 3 mm | 1.2 – 10 |
| Lid Overhang Past Back Wall | 8 mm | 2 – 30 |
| Hinge Tab Thickness (X) | 3 mm | 1.2 – 12 |
| Hinge Pin Diameter | 5 mm | 2 – 20 |
| Pin Protrusion Past Knuckle | 6 mm | 1 – 30 |
| Alignment Lip Wall Width | 2 mm | 0.8 – 8 |
| Alignment Lip Depth | 2 mm | 0.5 – 15 |
| Lip Clearance to Box Wall | 0.3 mm | 0.05 – 1.5 |
| Exploded Layout Gap | 30 mm | 5 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no