Enclosures and housings
Hillside Twin Studio Complex
- Bounding box
- 341 × 100 × 124 mm
- Engine
- 3D Printing B-rep
- Parameters
- 26
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
{ "project_type": "CAD Architectural Blueprint", "dimensions": { "total_length": "28m", "total_width": "10m", "levels": "3 levels of 3m height each (total 9m)" }, "studio_green": { "location": "Front zone (16m x 10m)", "components": [ { "name": "Garage", "dimensions": "Front section", "access": "Main entrance with vehicle parking" }, { "name": "Master Bedroom", "dimensions": "3.5m x 4m" }, { "name": "Ensuite Bathroom", "dimensions": "2m x 2.8m", "type": "Shower & WC" }, { "name": "Kitchenette Open Space", "type": "Open plan kitchen and living area" }, { "name": "Private Pool", "dimensions": "7m x 3m", "placement": "Embedded in the green zone" }, { "name": "Staircase Cage", "type": "Enclosed structural stairwell separating floors" } ], "openings": "Bilateral windows on both left and right side facades" }, "studio_orange": { "location": "Rear zone (12m x 10m)", "components": [ { "name": "Master Bedroom", "dimensions": "3.5m x 3.5m" }, { "name": "Bathroom", "dimensions": "2.8m x 2.5m", "type": "Shower & WC" }, { "name": "Kitchenette Open Space", "type": "Open plan living area" }, { "name": "Private Pool", "dimensions": "7m x 3m", "placement": "Embedded in the orange zone" }, { "name": "Access Passage", "type": "Connecting path passing through studio 1 staircase area" }, { "name": "Staircase Cage", "type": "Fully enclosed vertical circulation" } ], "openings": "Symmetrical bilateral side windows" }, "topography": { "ground_offset": "Strict compliance with natural slope and terrain level shifts (0.5m to 2m foundation drops for pools and lower levels as per reference cross-sections)" } }
Parameters
| Name | Value | Range |
|---|---|---|
| Print scale factor (1 = real size) | 0.01 mm | 0.002 – 0.05 |
| Site length | 28000 mm | 12000 – 40000 |
| Site width | 10000 mm | 5000 – 20000 |
| Number of storeys | 3 mm | 1 – 6 |
| Storey height | 3000 mm | 2000 – 5000 |
| Front (green) studio length | 16000 mm | 4000 – 24000 |
| Rear (orange) studio length | 12000 mm | 4000 – 20000 |
| Studio depth | 6500 mm | 3500 – 10000 |
| Wall thickness | 250 mm | 120 – 600 |
| Slab thickness | 250 mm | 120 – 600 |
| Window band height | 1800 mm | 600 – 2500 |
| Garage length | 6000 mm | 3000 – 9000 |
| Garage width | 5000 mm | 2500 – 6500 |
| Garage clear height | 3000 mm | 2000 – 4000 |
| Pool length | 7000 mm | 2000 – 12000 |
| Pool width | 3000 mm | 1000 – 6000 |
| Pool depth | 1500 mm | 500 – 3000 |
| Pool wall thickness | 200 mm | 100 – 500 |
| Stair core length | 3000 mm | 1500 – 6000 |
| Stair core width | 2500 mm | 1500 – 5000 |
| Stair bulkhead above roof | 800 mm | 0 – 2000 |
| Front terrace level above bed | 1800 mm | 0 – 4000 |
| Rear terrace level above bed | 2600 mm | 0 – 5000 |
| Access passage length | 3000 mm | 1000 – 6000 |
| Access passage width | 1500 mm | 800 – 3000 |
| Access passage thickness | 250 mm | 100 – 600 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,