Enclosures and housings
Hexagonal Threaded Lamp Base
- Bounding box
- 91.4 × 80 × 48 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully parametric hexagonal lamp base for FDM 3D printing. DESIGN: - Elegant minimalist luxury design. - Hexagonal external geometry. - Rounded vertical edges and slightly softened corners. - Clean surfaces without decorative textures. DIMENSIONS: - Total height: 40 mm. - All dimensions in millimeters. - Solid bottom section: 10 mm thick. - Hollow internal cavity starting above the 10 mm solid bottom. - Sufficient internal space for a small battery-operated LED module. - Flat bottom surface. LAMPSHADE CONNECTION: - Central circular threaded fitting on the top section. - Internal or external thread geometry suitable for a removable lampshade. - Thread diameter, pitch and depth must be editable parameters. - Provide adequate wall thickness around the threaded connection. CAD REQUIREMENTS: - Editable parametric dimensions. - Separate parameters for external dimensions, cavity dimensions and thread dimensions. - Single watertight solid body. - No self-intersections. - Geometry suitable for FDM 3D printing. - Exportable as STL and STEP. Do not invent a specific LED module size. Keep the internal cavity dimensions editable.
Parameters
| Name | Value | Range |
|---|---|---|
| Hexagon across flats | 80 mm | 40 – 160 |
| Overall height | 40 mm | 20 – 120 |
| Side wall thickness | 2.4 mm | 1.2 – 6 |
| Bottom plate thickness | 10 mm | 1.6 – 20 |
| Vertical corner radius | 3 mm | 0.5 – 12 |
| Top / bottom edge fillet | 1.5 mm | 0 – 6 |
| Light opening diameter | 50 mm | 15 – 120 |
| Lampshade seat recess diameter | 60 mm | 15 – 140 |
| Lampshade seat recess depth | 3.5 mm | 1 – 12 |
| Top plate thickness | 6 mm | 3 – 20 |
| Thread nominal diameter | 50 mm | 20 – 110 |
| Thread pitch | 2 mm | 0.5 – 6 |
| Thread height above top face | 8 mm | 2 – 40 |
| Wall thickness around thread | 3.5 mm | 1.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,