Brackets and mounts
Heavy-Duty Steel Chassis Frame
- Bounding box
- 2600 × 1200 × 375 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a heavy-duty rectangular steel chassis frame. The main body is 2600 mm long, 1200 mm wide, and 350 mm high, with rounded vertical edges of 30 mm radius. Add four square mounting pads on the top surface near the corners, each 200 mm by 200 mm and 25 mm thick, with a 20 mm central hole. Hollow out the inside bottom slightly by 50 mm to simulate a structural C-channel frame.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall frame length | 2600 mm | 1000 – 4000 |
| Overall frame width | 1200 mm | 500 – 2000 |
| Frame height | 350 mm | 100 – 600 |
| Vertical corner radius | 30 mm | 5 – 100 |
| Outer wall thickness | 40 mm | 15 – 100 |
| Bottom recess depth for C-channel | 50 mm | 10 – 150 |
| Mounting pad width and length | 200 mm | 100 – 400 |
| Mounting pad thickness | 25 mm | 10 – 60 |
| Central hole diameter | 20 mm | 10 – 50 |
| Distance from corner edge to pad | 50 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
