3D preview of Heat Sink with Power Semiconductor Module
Loading the interactive model…
Interactive 3D model of Heat Sink with Power Semiconductor Module

Enclosures and housings

Heat Sink with Power Semiconductor Module

1 views
Bounding box
64.0 × 64.0 × 23.9 mm
Engine
Precision B-rep
Parameters
21
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Continue editing the EXISTING 3D heat sink model. Do not delete, recreate or modify the existing heat sink or its elliptical cooling fins. Add the complete power semiconductor module assembly to the flat surface of the heat sink base opposite the cooling fins. All dimensions are in mm. CREATE THE FOLLOWING STACK FROM THE HEAT SINK UPWARDS: 1. Lower sinter layer: 40 × 40 × 0.10 mm. 2. Lower copper layer: 40 × 40 × 0.30 mm. 3. AlN ceramic layer: 40 × 40 × 0.63 mm. 4. Upper copper layer: 40 × 40 × 0.30 mm. 5. Silver sinter layer: 20 × 20 × 0.10 mm. 6. Silicon semiconductor die: 20 × 20 × 0.32 mm. These are provisional dimensions for the initial CAD model. CENTRE all layers on the heat sink base. Maintain proper face-to-face contact without unintended gaps or overlaps. BOND RIBBONS: Create TWO separate curved solid bond ribbons. Specifications: - Material-independent geometry. - Ribbon width: 2 mm. - Initial thickness: 0.1 mm. - Approximate centreline loop length: 8 mm. - Smooth elevated curved loop profile. - Flat rectangular cross-section. - Two identifiable bond feet per ribbon. CONNECTION LOCATIONS: - First end of each ribbon: Top surface of the silicon die. - Second end of each ribbon: Exposed upper copper landing area beside the silicon die. - Both ribbons must connect the die to the upper copper layer. - Arrange both ribbons parallel to each other. - Keep the two ribbons separated without intersection. Use a smooth 3D Sweep operation to create the curved ribbons. Do not create straight rectangular bars or cylindrical wires. Make ribbon thickness, loop height and ribbon spacing editable parameters. Keep all layers and both ribbons as separate identifiable solid bodies. BODY NAMES: Lower_Sinter Lower_Copper AlN_Ceramic Upper_Copper Silver_Sinter Silicon_Die Bond_Ribbon_1 Bond_Ribbon_2 FINAL REQUIREMENTS: - Preserve the existing heat sink and elliptical fins. - Create a complete assembled power semiconductor module. - Show an isometric view and a cross-sectional view. - Ensure the ribbons connect to the correct surfaces. - Check solid-body validity and unintended intersections. - Maintain editable CAD geometry. - Prepare the complete assembly for STEP export and ANSYS Workbench R2023 thermal and structural simulation. Prioritise engineering geometry over appearance.

Parameters

NameValueRange
Base Length64 mm30 – 200
Base Width64 mm30 – 200
Base Thickness5 mm2 – 20
Fin Ellipse Major Dia2 mm0.5 – 6
Fin Ellipse Minor Dia1 mm0.3 – 4
Fin Height15 mm2 – 60
Fin Pitch4 mm2.5 – 20
Fin Rows (Y)8 -1 – 40
Fin Columns (X)8 -1 – 40
Substrate Footprint40 mm24 – 80
Lower Sinter Thickness0.1 mm0.02 – 0.5
Lower Copper Thickness0.3 mm0.1 – 1.5
AlN Ceramic Thickness0.63 mm0.1 – 2
Upper Copper Thickness0.3 mm0.1 – 1.5
Silver Sinter Thickness0.1 mm0.02 – 0.5
Die / Silver Sinter Size20 mm8 – 22
Silicon Die Thickness0.32 mm0.05 – 1
Ribbon Width2 mm0.5 – 4
Ribbon Thickness0.1 mm0.05 – 0.5
Loop Height2 mm0.8 – 6
Ribbon Spacing (pitch)6 mm3 – 14

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
3D preview of G+1 Party Hall Structural Shell30000.0 × 60000.0 × 8950.0 mmPrecision

G+1 Party Hall Structural Shell

G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left

STEPSTLGLB19 PARAMS
Heat Sink with Power Semiconductor Module - Free CAD Model (STEP, STL) | TextoCAD