Jigs and fixtures
Haul-off Reel with Stand and Axle
- Bounding box
- 960.0 × 2003.1 × 2201.6 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
render it nicely and have a stand for the reel with an axle that goes through the center hole of the reel where the bottom of the stand is supported by the floor
Parameters
| Name | Value | Range |
|---|---|---|
| Reel Width | 700 mm | 100 – 2000 |
| Flange Outer Diameter | 2000 mm | 200 – 3000 |
| Flange Thickness | 50 mm | 10 – 200 |
| Drum Outer Diameter | 1500 mm | 100 – 2500 |
| Drum Inner Diameter | 1300 mm | 0 – 2000 |
| Center Bore Diameter | 200 mm | 10 – 500 |
| Axle Center Height (from floor) | 1200 mm | 400 – 3000 |
| Base Plate Thickness | 30 mm | 5 – 100 |
| Support Plate Thickness | 30 mm | 5 – 100 |
| Base Depth (Y) | 600 mm | 100 – 2000 |
| Base Overhang each Side | 100 mm | 0 – 500 |
| Axle Diameter | 190 mm | 10 – 500 |
| Stand Fillet Radius | 5 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl