Enclosures and housings
Handheld Remote Enclosure
- Bounding box
- 40.0 × 60.0 × 160.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a two-part handheld remote control enclosure. The main body is a rectangular prism 160 mm long, 60 mm wide, and 40 mm thick. Apply a 12 mm fillet to all vertical exterior edges to create an ergonomic, wand-like grip. Shell the inside with a 2 mm wall thickness. On the top face, create a 32 mm diameter circular cutout centered 35 mm from the top edge for an XY thumb joystick. Directly below the joystick, add two 12 mm circular holes spaced 15 mm apart for push buttons. On the right side face, add a 15 mm by 8 mm rectangular cutout for a slide power switch. At the bottom end face, add a 12 mm by 6 mm rectangular cutout for a USB-C port. The interior should be completely hollow to house microcontrollers, a DC-DC converter, and a 4xAA battery compartment. Split the model horizontally down the middle into a top shell and a bottom shell.
Parameters
| Name | Value | Range |
|---|---|---|
| Length | 160 mm | 100 – 300 |
| Width | 60 mm | 40 – 100 |
| Thickness | 40 mm | 30 – 60 |
| Wall Thickness | 2 mm | 1.5 – 3 |
| Joystick Diameter | 32 mm | 20 – 40 |
| Joystick From Top Edge | 35 mm | 20 – 60 |
| Button Hole Diameter | 12 mm | 8 – 16 |
| Button Spacing | 15 mm | 10 – 20 |
| Button Offset Below Joystick | 15 mm | 5 – 30 |
| Slide Switch Width (Z) | 15 mm | 10 – 20 |
| Slide Switch Height (X) | 8 mm | 5 – 12 |
| Slide Switch Center Z | 130 mm | 100 – 150 |
| USB‑C Width (Z) | 12 mm | 8 – 16 |
| USB‑C Half-Height (X) per shell | 6 mm | 4 – 8 |
| USB‑C Center Z | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no