Brackets and mounts
Handheld Dental Scanner Enclosure
- Bounding box
- 99.0 × 29.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a handheld dental scanner enclosure for 3D printing. The enclosure is designed for: - Seeed Studio XIAO ESP32S3 Sense Board size: 21 x 17.8 x 4 mm - OV3660 camera module Module size: 24 x 8.5 mm Lens diameter: 5 mm - LiPo battery 102050 52 x 20 x 10 mm 1000mAh Requirements: Overall size: Length 110 mm Width 28 mm Height 18 mm Split into top shell and bottom shell. Wall thickness 2 mm. Rounded ergonomic handle similar to a professional intraoral dental camera. Front circular camera head. Camera centered. Four LED holes around the lens. Internal battery holder. Internal PCB holder. USB-C opening. Power switch opening. Cable routing channel. Four M2 screw posts. Rounded corners. Optimized for FDM PLA printing. Generate STEP and STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 110 mm | 80 – 150 |
| Overall Width | 28 mm | 20 – 40 |
| Overall Height | 18 mm | 15 – 30 |
| Wall Thickness | 2 mm | 1 – 4 |
| Camera Head Diameter | 30 mm | 20 – 40 |
| Camera Head Length | 20 mm | 5 – 30 |
| Lens Opening Diameter | 6 mm | 3 – 10 |
| LED Hole Diameter | 3 mm | 2 – 5 |
| LED Circle Radius | 8 mm | 5 – 15 |
| Screw Post Outer Diameter | 4 mm | 3 – 6 |
| Screw Post Inner Diameter (clearance) | 2.2 mm | 1.5 – 3.5 |
| Screw Post X Offset | 40 mm | 20 – 50 |
| Screw Post Y Offset | 10 mm | 5 – 14 |
| USB‑C Opening Width | 9 mm | 6 – 12 |
| USB‑C Opening Height | 3.5 mm | 2 – 6 |
| USB‑C Opening X Position | -30 mm | -50 – -10 |
| USB‑C Z Center (0=split) | 0 mm | -5 – 5 |
| Switch Opening Diameter | 5 mm | 3 – 7 |
| Switch Opening X Position | -40 mm | -50 – -10 |
| Switch Z Center (0=split) | 0 mm | -5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o