3D preview of Half-Face Mask Shell
Loading the interactive model…
Interactive 3D model of Half-Face Mask Shell

Enclosures and housings

Half-Face Mask Shell

1 views
Bounding box
156.0 × 52.5 × 136.0 mm
Engine
3D Printing B-rep
Parameters
15
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Create a symmetrical half-face mask shell centered on the YZ plane, measuring 135 mm wide (X-axis), 115 mm tall (Z-axis), and 50 mm deep (Y-axis). Build the main body as a smooth loft between a rounded-triangular rear perimeter profile (135 mm wide × 115 mm tall) and a smaller rounded-oval front dome profile centered over the mouth area (50 mm wide × 40 mm tall) offset 50 mm forward in Y. Cut a symmetrical parabolic nose-bridge notch 22 mm wide and 12 mm deep into the top center edge, and curve the bottom edge inward by 28 mm in Y to form a chin cup. Hollow the body from the rear face with a uniform 2 mm wall thickness, leaving one open interior cavity with no internal ribs or holes. Around the entire rear perimeter edge, add an outward-curving face-seal flange 8 mm wide and 2 mm thick, terminated by a 3 mm rounded perimeter bead lip. Apply 2 mm fillets to all outer sharp edges.

Parameters

NameValueRange
Width135 mm50 – 200
Height115 mm50 – 200
Depth50 mm20 – 100
Front dome width50 mm20 – 100
Front dome height40 mm20 – 100
Front dome center Z-5 mm-30 – 30
Wall thickness2 mm1.2 – 6
Flange width8 mm4 – 20
Flange thickness2 mm1 – 6
Bead diameter3 mm1.5 – 8
Nose notch width22 mm10 – 50
Nose notch depth12 mm4 – 30
Chin curve depth28 mm5 – 50
Fillet radius2 mm0 – 5
Corner radius15 mm5 – 30

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

3D preview of Cylindrical Stainless Steel Basket with Folding Handles368.0 × 250.0 × 252.1 mmPrecision

Cylindrical Stainless Steel Basket with Folding Handles

Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai

STEPSTLGLB15 PARAMS
3D preview of Lego 1x4 Technic Brick31.8 × 7.8 × 11.3 mmPrecision

Lego 1x4 Technic Brick

Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8

STEPSTLGLB15 PARAMS
3D preview of Immersion Cooling Enclosure592.0 × 402.0 × 166.0 mmPrecision

Immersion Cooling Enclosure

Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal

STEPSTLGLB15 PARAMS
3D preview of Oval Safety Snap Carabiner46.5 × 12.0 × 80.0 mmPrecision

Oval Safety Snap Carabiner

Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.

STEPSTLGLB7 PARAMS
3D preview of Simple BWB with Propulsion Tube2130.0 × 6500.0 × 350.0 mmPrecision

Simple BWB with Propulsion Tube

Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a

STEPSTLGLB8 PARAMS
3D preview of Engranaje recto 50 dientes, módulo 2104.0 × 103.9 × 10.0 mmPrecision

Engranaje recto 50 dientes, módulo 2

Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá

STEPSTLGLB5 PARAMS
Half-Face Mask Shell - Free CAD Model (STEP, STL) | TextoCAD