Brackets and mounts
Grille Support Ring Ø800 (P11-80024)
- Bounding box
- 819.3 × 819.1 × 119.1 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Round sheet-metal grille support ring Ø800 (Rosenberg P11-80024): shallow funnel profile 2.8 mm sheet revolved about Z, folded rim hem and inner lip, 8 Ø11 holes on Ø252 plateau, flat-bar bracket 22x5 with two slots and two stiffening flat-bar ribs. STEP export.
Parameters
| Name | Value | Range |
|---|---|---|
| Sheet thickness | 2.8 mm | 0.8 – 6 |
| Overall outer diameter | 817 mm | 400 – 1200 |
| Central plateau outer diameter | 470 mm | 300 – 800 |
| Central opening diameter | 235 mm | 100 – 400 |
| Overall axial depth | 114 mm | 40 – 250 |
| Cone axial rise | 81 mm | 20 – 200 |
| Rim hem width | 10 mm | 3 – 30 |
| Inner edge lip height | 6 mm | 0 – 20 |
| Number of plateau holes | 8 | 0 – 24 |
| Plateau hole diameter | 11 mm | 3 – 30 |
| Plateau hole pitch circle diameter | 252 mm | 120 – 460 |
| Hole start angle | 0 deg | 0 – 90 |
| Flat bar length | 116 mm | 40 – 200 |
| Flat bar width | 22 mm | 10 – 50 |
| Flat bar thickness | 5 mm | 2 – 12 |
| Slot length | 20 mm | 6 – 40 |
| Slot width | 10 mm | 4 – 20 |
| Slot centre distance | 76 mm | 20 – 150 |
| Bracket angular position | 22.5 deg | 0 – 360 |
| Number of stiffening flat-bar ribs | 2 | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Micro RC Airplane Frame
Create a lightweight 3D-printable indoor micro RC airplane frame. The fuselage is a hollow rectangular boom 200 mm long, 3 mm wide, and 3 mm tall, with an open U-shaped electronics
