Enclosures and housings
Great Pyramid of Giza (Solid)
- Bounding box
- 145 × 145 × 92.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 2
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, geometrically accurate, 3D-printable model of the Great Pyramid of Giza (Pyramid of Khufu). ### 1. Geometric specifications The model must reproduce the original smooth-sided pyramid, including its four triangular faces and square base. Use the following specifications: - Shape: Regular square-based pyramid. - Base length: 145.00 mm. - Base width: 145.00 mm. - Face inclination (slant angle): 51° 51′ 14.3″. - Angle in decimal degrees: 51.85397°. - Apex: Precisely centred above the geometric centre of the square base. - Four identical triangular faces. - All four faces must meet at a single apex. IMPORTANT: The specified inclination is the angle between each triangular face and the horizontal base plane, NOT the angle between the face and the vertical axis. ### 2. Calculate the correct height Do not estimate the height. Calculate it mathematically using: H = (Base / 2) × tan(51.85397°) Expected height: approximately 92.31 mm. Maintain the exact specified angular relationship rather than independently rounding the height. ### 3. 3D printer constraints The model will be printed using a printer with the following build volume: - X: 210 mm - Y: 210 mm - Z: 250 mm The complete model must fit within these limits. Requirements: - Print as one single piece. - Orient the square base parallel to the print bed. - Place the entire bottom surface directly on the build plate. - No supports should be necessary. - No additional pedestal or display platform. - No geometry extending beyond the specified dimensions. ### 4. Surface and appearance Reproduce the Great Pyramid in its original finished appearance: - Four perfectly smooth triangular limestone faces. - Sharp, clearly defined edges. - A geometrically precise apex. - Flat, perfectly square bottom surface. - No exposed stepped masonry. - No artificial textures or decorative details. ### 5. CAD construction requirements Create a proper parametric solid, not merely a visual mesh. The model must: - Be a single watertight solid. - Have no self-intersections. - Have no non-manifold edges. - Have no internal geometry or unnecessary surfaces. - Be suitable for FDM 3D printing. Expose the base width and face inclination as editable parameters so that the model can be resized while preserving its proportions. ### 6. Deliverables Generate: 1. Editable native CAD file. 2. STEP (.step) file, if supported. 3. STL file with sufficient mesh resolution for smooth triangular faces. 4. A dimensioned technical drawing showing the base dimensions, total height and face inclination. Before exporting, validate the geometry and confirm that the model fits within the printer's 210 × 210 × 250 mm build volume. The final result must be geometrically accurate, not an approximation.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 145 mm | 100 – 200 |
| Face inclination | 51.85 deg | 45 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
