Enclosures and housings
Great Pyramid of Giza Replica
- Bounding box
- 145 × 145 × 92.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precision 3D-printable Great Pyramid of Giza replica. **Dimensions:** - Square base: 145 × 145 mm. - Height: 92.31 mm. - Preserve the correct Great Pyramid proportions. - Four triangular sloping sides meeting at a centred apex. **Critical design requirements:** 1. Completely OPEN bottom: remove the entire bottom face. No floor, membrane or internal base. 2. Add two circular inspection holes, 30 mm diameter, centred on two opposite triangular side faces, at the same height. 3. Position the inspection holes approximately halfway between the base and apex, measured vertically. 4. Ensure holes penetrate completely through the pyramid walls, allowing an unobstructed view of the interior. 5. Keep sufficient wall material around the holes for structural integrity. 6. Wall thickness: 2.0 mm, uniform throughout. 7. Maintain a completely unobstructed interior. **STL / manufacturing requirements:** - Single connected, watertight solid with an intentionally open bottom. - Correct outward-facing normals. - No inverted faces, self-intersections, duplicate surfaces or non-manifold geometry. - No unnecessary internal structures. - Flat, stable bottom perimeter suitable for direct placement on a 3D printer bed. - No supports required if reasonably achievable. **Validation:** Confirm the actual dimensions, wall thickness, open bottom, inspection-hole diameters and positions. Verify mesh integrity and ensure the slicer will interpret the model correctly. Do not add decorative features or alter the specified dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Square base width | 145 mm | 80 – 200 |
| Pyramid height | 92.31 mm | 50 – 150 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Inspection hole diameter | 30 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
