Brackets and mounts
Gravity-Responsive Isolation Manifold with Evaporation Cassettes
- Bounding box
- 229 × 80 × 113 mm
- Engine
- 3D Printing B-rep
- Parameters
- 42
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
- Model the evaporation modules as **hollow, double-walled cassette plates**. - Design the exterior faces with **alternating wetting and non-wetting micro-topographic structures** to promote uniform lateral fluid spreading. - Integrate dedicated **physical mounting slots** within each cassette frame for a localized sensor cluster, including: - Contact RTDs (temperature sensors) - Thin-film thickness estimators - Optional heat-flux sensing points - Sensor outputs feed the **Modular Evaporation Cell Health Map**, enabling real-time performance monitoring and predictive maintenance. ### Critical Dimensions - Adjustable cassette-to-cassette airflow spacing: - **20–40 mm**
Parameters
| Name | Value | Range |
|---|---|---|
| Header block length X | 120 mm | 60 – 200 |
| Header block width Y | 80 mm | 40 – 160 |
| Header block height Z | 50 mm | 30 – 120 |
| Cavity floor thickness | 8 mm | 4 – 20 |
| Internal cavity length X | 60 mm | 30 – 120 |
| Internal cavity width Y | 60 mm | 30 – 120 |
| Corner mounting hole diameter | 4.5 mm | 3 – 8 |
| Inlet barrel diameter | 44 mm | 40 – 60 |
| Inlet flange diameter | 50 mm | 40 – 70 |
| Inlet fitting length | 25 mm | 15 – 40 |
| Inlet flow passage | 26 mm | 10 – 40 |
| Ring outer diameter | 55 mm | 40 – 80 |
| Ring inner diameter | 45 mm | 30 – 70 |
| Ring thickness | 8 mm | 4 – 16 |
| Ring underside height above bed | 36 mm | 15 – 60 |
| Pivot pin diameter | 5 mm | 3 – 8 |
| Pendulum diameter | 20 mm | 12 – 34 |
| Pendulum length | 30 mm | 15 – 50 |
| Plate diameter | 48 mm | 30 – 70 |
| Plate thickness | 3 mm | 1.5 – 6 |
| Aperture diameter | 12 mm | 4 – 20 |
| Aperture pitch radius | 15 mm | 6 – 22 |
| Outlet branch offset from centre | 26 mm | 8 – 38 |
| Branch / inlet axis height | 25 mm | 10 – 40 |
| Valve bore diameter | 17.8 mm | 8 – 26 |
| Valve body diameter | 18 mm | 6 – 24 |
| Valve module length | 35 mm | 20 – 50 |
| Valve head diameter | 24 mm | 10 – 34 |
| Outlet fitting diameter | 15 mm | 8 – 22 |
| Outlet fitting length | 20 mm | 10 – 30 |
| Cassette plate width | 70 mm | 40 – 120 |
| Cassette plate height | 90 mm | 50 – 150 |
| Cassette plate thickness | 6 mm | 4 – 10 |
| Double-wall thickness | 1.8 mm | 1.2 – 3 |
| Cassette-to-cassette airflow spacing | 30 mm | 20 – 40 |
| Micro-groove width | 1 mm | 0.6 – 2 |
| Micro-groove depth | 0.5 mm | 0.2 – 1 |
| Alternating structure pitch | 4 mm | 2 – 8 |
| Sensor slot width | 4 mm | 2 – 8 |
| Sensor slot depth into thickness | 3 mm | 1.5 – 6 |
| Sensor slot depth from top edge | 3 mm | 1.5 – 6 |
| Number of sensor slots per cassette | 3 mm | 1 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
SG90 2-DOF Robotic Arm Assembly
"Design a compact, 3D-printable 2-DOF robotic arm specifically for a mobile library robot. The arm should consist of a rotating base joint, a lower link, an upper link, and a simpl