Enclosures and housings
Gravity-Adaptive Winged Spin-Deceleration Device
- Bounding box
- 339.7 × 339.7 × 365.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Engineering line drawing: a black-and-white single-line schematic without shading or extraneous decoration. Illustrate a gravity-adaptive, variable-deployment winged spin-deceleration device. From top to bottom: a rotatable base at the top, a vertically sliding pull rod in the middle, four symmetric connecting rods extending outward to foldable wings, a suspension rod connected below the pull rod, and a cargo pod for fragile items hanging beneath the suspension rod. Draw two comparative diagrams side by side: in the light-load state, the wings are opened at a small angle; in the heavy-load state, the wings are pulled open wider by the pull rod. Label all components. Use no color; keep lines clean. This is a course design principle diagram.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Diameter | 100 mm | 60 – 200 |
| Base Height | 30 mm | 10 – 80 |
| Bearing Boss Diameter | 28 mm | 12 – 60 |
| Bearing Boss Height | 6 mm | 1 – 20 |
| Bearing Bore Diameter | 8.4 mm | 5 – 30 |
| Pull Rod Diameter | 8 mm | 4 – 25 |
| Pull Rod Length | 150 mm | 60 – 320 |
| Hub Collar Diameter | 24 mm | 10 – 60 |
| Hub Collar Height | 16 mm | 4 – 40 |
| Link Rod Diameter | 5 mm | 2 – 14 |
| Link Rod Length | 80 mm | 40 – 180 |
| Wing Count | 4 count | 2 – 8 |
| Hinge Radius | 55 mm | 20 – 120 |
| Hinge Drop Below Base | 40 mm | 5 – 150 |
| Hinge Pin Diameter | 10 mm | 4 – 30 |
| Wing Length | 120 mm | 40 – 260 |
| Wing Chord | 40 mm | 15 – 120 |
| Wing Thickness | 4 mm | 1 – 15 |
| Wing Droop Angle | 20 deg | 0 – 75 |
| Wing Pitch Angle | 12 deg | -45 – 45 |
| Suspension Rod Diameter | 6 mm | 3 – 20 |
| Suspension Rod Length | 120 mm | 40 – 260 |
| Suspension Collar Diameter | 16 mm | 6 – 50 |
| Suspension Collar Height | 14 mm | 4 – 40 |
| Cargo Pod Diameter | 80 mm | 30 – 180 |
| Cargo Pod Height | 100 mm | 30 – 220 |
| Pod Neck Diameter | 20 mm | 6 – 60 |
| Pod Neck Height | 10 mm | 2 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no