Enclosures and housings
GPS Module Enclosure Single Cavity
- Bounding box
- 42.5 × 29.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 23, 2026
Download
Free to download and use. See the terms.
The prompt
I wanna to have it somehow else: Create a highly compact, form-fitting electronics enclosure case with a snap-fit lid for a GPS module sandwich assembly. Inside there is a single main cavity measuring exactly 39.5mm length, 26.0mm width, and 14.5mm total height to tightly fit the PCB with the ceramic antenna attached directly underneath it. On one of the short sides, include a precise rectangular cutout measuring 14.0mm width and 6.0mm height, positioned flush with the top edge of the PCB level, acting as a pass-through slot for the 4-pin right-angle DuPont cable connector. Minimalist industrial design, 1.5mm wall thickness, completely flat surfaces, optimized for supportless FDM 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Thickness | 1.5 mm | 0.8 – 4 |
| Cavity Length | 39.5 mm | 20 – 80 |
| Cavity Width | 26 mm | 15 – 60 |
| Cavity Height | 14.5 mm | 5 – 30 |
| Cutout Width | 14 mm | 5 – 20 |
| Cutout Height | 6 mm | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no