Brackets and mounts
GNSS Pole 360 Camera Mount Cage
- Bounding box
- 207.1 × 239.1 × 397 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
3D printable mechanical mounting cage for a surveying GNSS pole and a 360 camera, symmetrical tripod-arch structure designed for FDM 3D printing, single solid watertight manifold mesh. Bottom section: a vertical cylindrical clamp sleeve with a flat bottom face, outer diameter 46 mm, inner cylindrical bore diameter 32 mm, height 45 mm, featuring a vertical slit and two parallel side clamping tabs with two horizontal M5 bolt holes for tightening onto a standard 32 mm survey pole. Middle section: three identical slender curved structural arms spaced equally at 120 degrees around the central vertical axis. The three arms rise smoothly outward and upward from the top rim of the bottom clamp sleeve, arching around a central cylindrical clearance zone (210 mm diameter, 220 mm height) to leave ample open space for a GNSS receiver, then converging inward at the top. Each arm has a rounded teardrop cross-section (14 mm wide by 18 mm thick) for rigidity and minimal wind resistance. Top section: the three arms merge into a solid, horizontal circular camera platform centered coaxially with the bottom clamp bore. The top platform has a 42 mm outer diameter, 12 mm thickness, flat top and bottom surfaces, and a central vertical cylindrical through-hole (6.5 mm diameter) for a standard 1/4-20 camera mounting screw. Clean engineering CAD style, smooth fillets at all joints, no floating parts, no textures, neutral matte gray surface, optimized for support-free or minimal-support 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Clamp outer diameter | 46 mm | 30 – 80 |
| Clamp inner bore diameter | 32 mm | 20 – 60 |
| Clamp height | 45 mm | 25 – 80 |
| Vertical slit width | 4 mm | 2 – 8 |
| Clamping tab thickness | 6 mm | 3 – 12 |
| Clamping tab radial length | 14 mm | 8 – 25 |
| Clamping tab height | 34 mm | 20 – 60 |
| M5 bolt clearance hole diameter | 5.5 mm | 3 – 8 |
| Lower bolt height | 15 mm | 5 – 40 |
| Upper bolt height | 32 mm | 8 – 40 |
| Arm tangential width | 14 mm | 8 – 25 |
| Arm radial thickness | 18 mm | 10 – 30 |
| Central GNSS clearance diameter | 210 mm | 120 – 260 |
| Central GNSS clearance height | 220 mm | 120 – 300 |
| Camera platform diameter | 42 mm | 25 – 70 |
| Camera platform thickness | 12 mm | 6 – 25 |
| 1/4-20 screw through-hole diameter | 6.5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
