Brackets and mounts
Gemfan 1210 2-Blade Micro Propeller
- Bounding box
- 31.2 × 6.9 × 3.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of a 2-blade micro drone propeller matching the Gemfan 1210 specification for 0702SE brushless motors (1.000 mm shaft), specifically compensated for FDM 3D printing in ABS plastic (accounting for ~0.6% thermal shrinkage and minimum extrusion width). Dimensions and geometry: - Total propeller disk diameter: 31.186 mm (compensated for 0.6% ABS shrinkage to yield 31.000 mm after cooling). - Number of blades: 2, diametrically opposed at 180.000 degrees around the Z-axis. - Direction of rotation: Clockwise (CW). - Center hub outer diameter: 4.400 mm (slightly reinforced wall thickness for ABS layer adhesion). - Center hub height (thickness): 3.420 mm (matched for 4.200 mm motor shaft length). - Center shaft mounting bore: 1.060 mm diameter cylindrical through-hole along the Z-axis (oversized by +0.060 mm to compensate for ABS hole shrinkage onto a 1.000 mm shaft). Add a 0.300 mm x 45-degree entry chamfer at the bottom face for press-fit installation, and a 0.150 mm chamfer at the top face. - Blade pitch: constant geometric pitch of 25.550 mm (equivalent to 1.000 inch after shrinkage). - Blade root width (at hub connection): 3.400 mm. - Maximum blade chord width: 7.350 mm, located at 65% of the blade radius (10.135 mm from center). - Blade tip shape: rounded swept-back micro-whoop profile with a tip radius of 1.850 mm. - Airfoil cross-section: FDM-printable cambered micro-propeller airfoil, maximum thickness 0.850 mm near the root tapering smoothly to 0.450 mm near the tip, with rounded leading edge (radius 0.220 mm) and reinforced trailing edge (0.320 mm minimum thickness so thin walls slice cleanly). - Blade root fillet: smooth 0.500 mm transition fillet between each blade and the outer wall of the center hub to prevent delamination. Ensure clean manifold geometry, smooth lofted surfaces along the twisted blade profiles, and export-ready precision in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Propeller disk diameter | 31.19 mm | 25 – 40 |
| Number of blades | 2 mm | 2 – 2 |
| Hub outer diameter | 4.4 mm | 3 – 8 |
| Hub height | 3.42 mm | 2 – 6 |
| Shaft bore diameter | 1.06 mm | 0.8 – 2 |
| Bottom bore entry chamfer | 0.3 mm | 0 – 1 |
| Top bore chamfer | 0.15 mm | 0 – 1 |
| Constant geometric pitch | 25.55 mm | 10 – 40 |
| Blade root chord | 3.4 mm | 1 – 8 |
| Maximum blade chord | 7.35 mm | 2 – 12 |
| Max chord radial fraction | 0.65 mm | 0.3 – 0.9 |
| Rounded tip radius | 1.85 mm | 0.5 – 4 |
| Root airfoil thickness | 0.85 mm | 0.4 – 2 |
| Tip airfoil thickness | 0.45 mm | 0.3 – 1 |
| Leading edge radius | 0.22 mm | 0.05 – 0.5 |
| Trailing edge thickness | 0.32 mm | 0.1 – 0.8 |
| Blade-to-hub fillet radius | 0.5 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
