Jigs and fixtures
Geester Supercar Parametric Assembly
- Bounding box
- 4400.0 × 2372.6 × 1320.0 mm
- Engine
- Precision B-rep
- Parameters
- 87
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed parametric 3D CAD model of the Geester, an original Brazilian mid-engine supercar by Blue Feather Engineering. Specs: 4.0L twin-turbo flat-plane V6, 1120 hp, 10,000 rpm, RWD, ~1100 kg target, short wheelbase, very low center of gravity, carbon-fiber structural chassis. Design: extremely low and wide body, compact cabin, aggressive thin headlights, large functional front and side air intakes, sculpted side aero channels, large rear diffuser, active rear wing, short dual exhaust outlets, large performance wheels and tires, and a track-focused aerodynamic body. Place the engine, transmission and differential behind the cabin, with radiators and cooling systems at the front. Use a flat floor and functional aerodynamic surfaces. The design should combine the philosophy of the Porsche 911 GT3 RS, Audi R8, Corvette Z06 and modern track-focused hypercars, but must be completely original and not copy any existing vehicle. Prioritize realistic automotive proportions, functional aerodynamics, mechanical packaging and manufacturable geometry over decorative details.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 4400 mm | 4000 – 5000 |
| Overall width | 2050 mm | 1900 – 2200 |
| Overall height | 1150 mm | 1000 – 1400 |
| Ground clearance | 100 mm | 60 – 150 |
| Front axle X | 950 mm | 700 – 1200 |
| Rear axle X | 3600 mm | 3000 – 4200 |
| Front track | 1680 mm | 1500 – 1900 |
| Rear track | 1720 mm | 1500 – 2000 |
| Monocoque length | 3900 mm | 3400 – 4300 |
| Monocoque width | 1550 mm | 1300 – 1700 |
| Monocoque height | 500 mm | 350 – 700 |
| Monocoque bottom Z | 100 mm | 60 – 160 |
| Monocoque center X | 2350 mm | 1800 – 3000 |
| Roll hoop X | 2700 mm | 2300 – 3200 |
| Roll hoop width | 300 mm | 200 – 500 |
| Roll hoop height | 350 mm | 200 – 500 |
| Roll hoop tube diameter | 40 mm | 20 – 80 |
| Engine block length X | 650 mm | 500 – 800 |
| Engine block width Y | 620 mm | 500 – 800 |
| Engine block height Z | 580 mm | 400 – 700 |
| Engine center X | 3000 mm | 2500 – 3500 |
| Engine center Z | 420 mm | 300 – 550 |
| Transaxle length X | 550 mm | 400 – 700 |
| Transaxle width Y | 480 mm | 350 – 600 |
| Transaxle height Z | 460 mm | 350 – 600 |
| Transaxle center X | 3600 mm | 3000 – 4200 |
| Transaxle center Z | 420 mm | 300 – 550 |
| Differential length X | 400 mm | 250 – 500 |
| Differential width Y | 320 mm | 200 – 420 |
| Differential height Z | 320 mm | 200 – 420 |
| Differential center X | 3600 mm | 3000 – 4200 |
| Differential center Z | 420 mm | 300 – 550 |
| Cooling pack length X | 180 mm | 120 – 260 |
| Cooling pack width Y | 450 mm | 300 – 600 |
| Cooling pack height Z | 700 mm | 500 – 900 |
| Cooling pack X | 450 mm | 200 – 900 |
| Cooling pack Y offset | 600 mm | 300 – 800 |
| Cooling pack center Z | 450 mm | 300 – 700 |
| Front wheel/tire diameter | 694 mm | 600 – 800 |
| Front wheel/tire width | 265 mm | 220 – 320 |
| Front suspension arm diameter | 30 mm | 15 – 50 |
| Rear wheel/tire diameter | 728 mm | 640 – 840 |
| Rear wheel/tire width | 325 mm | 280 – 390 |
| Rear suspension arm diameter | 35 mm | 15 – 60 |
| Rear wing span | 1850 mm | 1500 – 2200 |
| Rear wing chord | 340 mm | 200 – 500 |
| Rear wing thickness | 40 mm | 20 – 80 |
| Rear wing center X | 3950 mm | 3400 – 4400 |
| Wing mount base Z | 900 mm | 700 – 1100 |
| Wing height above deck | 250 mm | 80 – 300 |
| Wing endplate height | 300 mm | 150 – 500 |
| Wing endplate thickness | 20 mm | 5 – 50 |
| Wing pylon width Y | 80 mm | 30 – 150 |
| Wing pylon depth X | 100 mm | 40 – 200 |
| Wing pylon Y offset | 200 mm | 100 – 400 |
| Floor thickness | 30 mm | 10 – 60 |
| Floor center Z | 80 mm | 40 – 140 |
| Splitter length | 350 mm | 200 – 600 |
| Splitter thickness | 30 mm | 10 – 80 |
| Diffuser length | 600 mm | 300 – 1000 |
| Diffuser width | 1800 mm | 1200 – 2050 |
| Diffuser outlet height | 180 mm | 100 – 300 |
| Diffuser start Z | 80 mm | 40 – 140 |
| Diffuser fin count | 5 count | 3 – 9 |
| Diffuser fin thickness | 8 mm | 3 – 20 |
| Exhaust pipe diameter | 76 mm | 40 – 120 |
| Exhaust tip diameter | 100 mm | 50 – 150 |
| Exhaust muffler diameter | 140 mm | 80 – 200 |
| Exhaust muffler length | 250 mm | 120 – 400 |
| Exhaust center Y offset | 200 mm | 80 – 350 |
| Exhaust center Z | 180 mm | 100 – 300 |
| Exhaust muffler center X | 3900 mm | 3300 – 4300 |
| Seat width | 450 mm | 300 – 600 |
| Seat depth | 500 mm | 300 – 700 |
| Seat height | 700 mm | 500 – 900 |
| Seat center X | 1800 mm | 1200 – 2400 |
| Seat center Y offset | 350 mm | 200 – 500 |
| Seat center Z | 350 mm | 200 – 600 |
| Steering wheel diameter | 350 mm | 250 – 450 |
| Steering wheel thickness | 25 mm | 10 – 50 |
| Steering wheel X | 1600 mm | 1200 – 2200 |
| Steering wheel Z | 400 mm | 250 – 600 |
| Pedal box width Y | 300 mm | 200 – 450 |
| Pedal box depth X | 130 mm | 80 – 220 |
| Pedal box height Z | 120 mm | 60 – 220 |
| Pedal box X | 1300 mm | 1000 – 1800 |
| Pedal box Z | 250 mm | 150 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl