Enclosures and housings
gaming_laptop_enclosure
- Bounding box
- 326.0 × 216.0 × 18.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a gaming laptop base shell measuring 326mm wide, 216mm deep, and 18mm tall with a wall thickness of 2.5mm. On the inside floor, place four cylindrical motherboard standoffs 4mm tall with a 7mm outer diameter and a 4.2mm inner hole for M3 heat-set inserts. On the left wall, add cutouts for two USB-C ports measuring 10mm by 6mm and one USB-A port measuring 15mm by 7mm. On the right wall, add a 7mm diameter headphone jack cutout. On the rear wall, add an angled exhaust vent opening measuring 140mm wide by 12mm tall with louvered grilles. On the bottom floor, add an intake grille pattern measuring 80mm by 50mm beneath the fan zone. Add a 3.5mm wide by 4mm deep lightbar channel along the front bottom lip for an RGB LED strip.
Parameters
| Name | Value | Range |
|---|---|---|
| Shell outer width | 326 mm | 200 – 400 |
| Shell outer depth | 216 mm | 150 – 300 |
| Shell outer height | 18 mm | 10 – 40 |
| Wall thickness | 2.5 mm | 1 – 5 |
| USB‑C cutout width | 10 mm | 5 – 20 |
| USB‑C cutout height | 6 mm | 3 – 15 |
| USB‑A cutout width | 15 mm | 10 – 30 |
| USB‑A cutout height | 7 mm | 4 – 15 |
| Headphone jack diameter | 7 mm | 4 – 15 |
| Exhaust vent width | 140 mm | 50 – 200 |
| Exhaust vent height | 12 mm | 5 – 30 |
| Intake grille width | 80 mm | 30 – 150 |
| Intake grille height | 50 mm | 20 – 100 |
| Light‑bar channel width | 3.5 mm | 2 – 10 |
| Light‑bar channel depth | 4 mm | 1 – 10 |
| Standoff height | 4 mm | 2 – 10 |
| Standoff outer diameter | 7 mm | 4 – 12 |
| Standoff inner hole diameter | 4.2 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no