Enclosures and housings
G.G.COMP 8-Slot Cable Comb
- Bounding box
- 45 × 4 × 13.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise, editable CAD model of a 3D-printable PC cable comb for the brand G.G.COMP. Dimensions: 45 mm long, 13 mm high, 4 mm thick. Black PETG, designed for FDM 3D printing. Geometry: - Exactly 8 evenly spaced open slots along the bottom edge for parallel sleeved cables. - Cable diameter: 2.0 mm; adjustable slot width, initially 2.2 mm. - Rounded outer corners and smooth edges. - Add a functional snap-fit locking tab at one short end. - Add centered embossed text "G.G.COMP" on the top face, raised 0.6 mm, minimalist sans-serif font. - Keep the logo editable and the main body a single solid. - Avoid support material where possible. Use parametric dimensions. Preserve the exact overall dimensions. Ensure adequate material between slots and a printable locking tab. Do not create a visual-only mesh. Export editable CAD, STEP and STL files if supported. Check watertight geometry and verify all dimensions before export.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 45 mm | 20 – 120 |
| Overall height | 13 mm | 8 – 30 |
| Overall thickness | 4 mm | 2 – 10 |
| Number of cable slots | 8 mm | 2 – 16 |
| Slot width | 2.2 mm | 1.5 – 6 |
| Slot depth from bottom | 6.5 mm | 3 – 12 |
| End margin to first slot | 7.4 mm | 3 – 15 |
| Outer corner radius | 2 mm | 0.5 – 5 |
| Gap between body and finger | 1.6 mm | 1.2 – 3 |
| Finger thickness | 1.8 mm | 1.2 – 4 |
| Hook protrusion | 0.8 mm | 0.4 – 2 |
| Solid height under finger gap | 2 mm | 1 – 6 |
| Finger top height | 12.5 mm | 6 – 13 |
| Hook height | 2 mm | 1 – 4 |
| Emboss font size | 2.8 mm | 1 – 4 |
| Emboss height | 0.6 mm | 0.4 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no