Enclosures and housings
Fuji Film Roll Lamp Wrap Panel
- Bounding box
- 238.0 × 78.0 × 2.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat rectangular lamp wrap panel inspired by a vintage Fujifilm 35mm film roll label. Dimensions: 230 mm long, 78 mm high, 1.2 mm thick. Add a tab-and-slot locking system on the left and right edges so the panel can be rolled into a cylinder and locked. Add raised decorative borders near the top and bottom. Add raised text "FUJIFILM" near the top. Add larger raised text "FUJI 400" in the center. Add smaller film-style label boxes and decorative details. Keep the design clean and suitable for 3D printing as one flat part.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Length | 230 mm | 150 – 350 |
| Panel Height | 78 mm | 40 – 150 |
| Panel Thickness | 1.2 mm | 0.6 – 3 |
| Tab Length | 8 mm | 4 – 20 |
| Tab Width | 10 mm | 5 – 25 |
| Tab Count | 5 | 2 – 10 |
| Tab Edge Margin | 8 mm | 2 – 20 |
| Slot Clearance | 1 mm | 0.1 – 5 |
| Border Strip Height | 2 mm | 0.5 – 8 |
| Border Raise Height | 0.5 mm | 0.2 – 2 |
| Border Inset from Edge | 4 mm | 1 – 12 |
| Border Side Inset | 8 mm | 2 – 20 |
| FUJIFILM Text Center Y | 60 mm | 45 – 78 |
| FUJIFILM Text Height | 6 mm | 3 – 12 |
| FUJIFILM Text Raise | 0.5 mm | 0.2 – 2 |
| FUJI 400 Text Center Y | 35 mm | 20 – 55 |
| FUJI 400 Text Height | 16 mm | 8 – 30 |
| FUJI 400 Text Raise | 0.8 mm | 0.2 – 2.5 |
| Small Box Count | 3 | 1 – 6 |
| Small Box Width | 8 mm | 4 – 20 |
| Small Box Height | 4 mm | 2 – 10 |
| Small Box Raise | 0.4 mm | 0.2 – 1.5 |
| Small Box Center Y | 15 mm | 5 – 40 |
| Small Box Spacing | 10 mm | 0 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no