Mechanical parts
FTC Pivot Launcher Robot Base
- Bounding box
- 547.2 × 457.2 × 468.8 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Make it the same as the original I showed you, but replace the flower scoring and vertical lift and hive scoring arm with a pivot and launcher with a hood that helps angle and position where we want to shoot. ( HIVE ↑ ┌─────┐ │ ○○○ │ └──┬──┘ ╱ ┌────╱────┐ │ LAUNCHER│ └────╱────┘ ● ← pivot ┌───────────────┐ │ 4-PC HOPPER │ │ ○ ○ ○ ○ │ ├───────────────┤ │ INTAKE │ └───────────────┘ ◉ ◉ ◉ ◉ 18" × 18")
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Footprint | 457.2 mm | 300 – 600 |
| Chassis Plate Thickness | 12 mm | 6 – 30 |
| Corner Radius | 8 mm | 0 – 18 |
| Wheel Diameter | 96 mm | 40 – 150 |
| Wheel Width | 50 mm | 20 – 90 |
| Wheel Inset from Side | 70 mm | 30 – 150 |
| Axle Diameter | 12 mm | 6 – 30 |
| Intake Roller Diameter | 60 mm | 20 – 120 |
| Roller Center Spacing | 60 mm | 30 – 140 |
| Roller Position from Center | 155 mm | 60 – 215 |
| Roller Axle Height | 45 mm | 20 – 90 |
| Intake Side Plate Thk | 10 mm | 4 – 25 |
| Intake Side Plate Height | 80 mm | 40 – 160 |
| Hopper Length (X) | 300 mm | 150 – 420 |
| Hopper Depth (Y) | 170 mm | 80 – 300 |
| Hopper Height | 150 mm | 60 – 260 |
| Hopper Wall / Floor | 10 mm | 4 – 25 |
| Piece Slots | 4 ea | 2 – 6 |
| Slot Divider Thickness | 8 mm | 3 – 20 |
| Launch Trough Angle | 50 deg | 15 – 80 |
| Pivot Y Position | -160 mm | -220 – -60 |
| Pivot Height (Z) | 230 mm | 120 – 380 |
| Pivot Shaft Diameter | 24 mm | 10 – 50 |
| Pivot Tower Offset (X) | 65 mm | 40 – 140 |
| Pivot Tower Thickness | 18 mm | 6 – 40 |
| Pivot Tower Depth (Y) | 110 mm | 50 – 200 |
| Trough Length | 300 mm | 120 – 420 |
| Trough Width | 120 mm | 60 – 200 |
| Trough Wall Thickness | 10 mm | 4 – 25 |
| Trough Wall Height | 60 mm | 25 – 140 |
| Trough Floor Thickness | 12 mm | 5 – 30 |
| Hood Inner Radius | 70 mm | 40 – 160 |
| Hood Wall Thickness | 12 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con