Enclosures and housings
FTC Number Plate Holder with Locking Tab and Base
- Bounding box
- 244.6 × 143.2 × 22.5 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
On the edge of the sliding mechanism add a small vertical rectangular prism so the plate is locked in when it is slided in. And add it at the bottom where the plate sits. This should be 20mm. The bottom should be elevated 50mm. Add 5 holes on that bottom part with a diameter of 4. In those holes there should be threading so I can pass a screw though it
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Height | 88.2 mm | 50 – 150 |
| Plate Width | 234.6 mm | 100 – 300 |
| Plate Depth | 10 mm | 5 – 30 |
| Clearance | 1 mm | 0.5 – 3 |
| Wall Thickness | 4 mm | 2 – 10 |
| Back Thickness | 4 mm | 2 – 10 |
| Mount Hole Diameter | 5 mm | 2 – 10 |
| Mount Hole Inset | 10 mm | 3 – 20 |
| Corner Radius | 4 mm | 0.5 – 10 |
| Tab Length (X) | 20 mm | 5 – 50 |
| Tab Height (Y) | 20 mm | 5 – 50 |
| Tab Thickness (Z) | 2 mm | 1 – 10 |
| Base Height | 50 mm | 5 – 100 |
| Base Hole Diameter | 4 mm | 1 – 10 |
| Number of Base Holes | 5 | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox