Enclosures and housings
Front Panel (Galga Frontal Plana)
- Bounding box
- 184.0 × 144.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Crea en KCL una galga frontal plana y paramétrica, en milímetros, para impresión 3D. Placa exterior: - 184 x 144 x 3 mm - esquinas con radio 6 mm Usa como origen (0,0) la esquina superior izquierda de la placa. Abertura pasante: - tamaño 154.62 x 88.06 mm - esquina superior izquierda en X=13.18, Y=25.62 - no centrar automáticamente Cuatro agujeros pasantes Ø3.40 mm, con centros exactos: - (11.90, 16.00) - (165.90, 16.00) - (11.90, 128.00) - (165.90, 128.00) La separación entre centros debe ser 154 mm horizontal y 112 mm vertical. Genera un solo sólido manifold, con trasera plana. No añadas más agujeros, pestañas, soportes, nervios, chaflanes, avellanados, texto ni adornos. No cambies ni centres las coordenadas indicadas.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 184 mm | 50 – 300 |
| Height | 144 mm | 50 – 300 |
| Thickness | 3 mm | 1 – 10 |
| Corner Radius | 6 mm | 1 – 20 |
| Cutout Width | 154.62 mm | 50 – 250 |
| Cutout Height | 88.06 mm | 30 – 200 |
| Cutout Offset X | 13.18 mm | 0 – 100 |
| Cutout Offset Y | 25.62 mm | 0 – 100 |
| Hole Diameter | 3.4 mm | 1 – 10 |
| Hole 1 X | 11.9 mm | 0 – 200 |
| Hole 1 Y | 16 mm | 0 – 200 |
| Hole 2 X | 165.9 mm | 0 – 200 |
| Hole 2 Y | 16 mm | 0 – 200 |
| Hole 3 X | 11.9 mm | 0 – 200 |
| Hole 3 Y | 128 mm | 0 – 200 |
| Hole 4 X | 165.9 mm | 0 – 200 |
| Hole 4 Y | 128 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox