Brackets and mounts
Friction Roller Tube Assembly
- Bounding box
- 160 × 83.5 × 238.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 29
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
"Add the remaining parts to the assembly: Roller_01, Roller_02, and Roller_03 as three independent friction rollers (20mm diameter, 16mm width) positioned 120 degrees apart around the tube; Roller_Shafts and Roller_Holders; Left_Tube_Clamp and Right_Tube_Clamp; Linear_Carriage, Linear_Guides, and Lead_Screw; and Internal_Alignment_Sleeves."
Parameters
| Name | Value | Range |
|---|---|---|
| Tube outer diameter | 22 mm | 12 – 40 |
| Tube inner bore | 9.6 mm | 5 – 30 |
| Tube length | 150 mm | 80 – 220 |
| Roller diameter | 20 mm | 10 – 40 |
| Roller width | 16 mm | 6 – 30 |
| Roller station position along tube | 40 mm | -60 – 70 |
| Roller shaft diameter | 6 mm | 3 – 10 |
| Roller shaft length | 30 mm | 15 – 50 |
| Shaft inner end radius from tube axis | 12 mm | 8 – 20 |
| Holder length along tube | 24 mm | 12 – 40 |
| Holder width, tangential | 18 mm | 10 – 30 |
| Holder radial thickness | 12 mm | 6 – 20 |
| Holder radial centre from tube axis | 37 mm | 25 – 55 |
| Clamp outer diameter | 30 mm | 24 – 45 |
| Clamp axial thickness | 8 mm | 4 – 16 |
| Clamp slit width | 1.5 mm | 1 – 4 |
| Clamp screw hole diameter | 3.4 mm | 2.5 – 6 |
| Carriage length | 40 mm | 20 – 80 |
| Carriage width | 30 mm | 16 – 60 |
| Carriage height | 20 mm | 8 – 40 |
| Guide rail length | 150 mm | 80 – 250 |
| Guide rail width | 12 mm | 6 – 24 |
| Guide rail height | 8 mm | 4 – 16 |
| Rail centre offset from axis | 13 mm | 8 – 25 |
| Lead screw diameter | 8 mm | 4 – 16 |
| Lead screw length | 160 mm | 80 – 260 |
| Sleeve outer diameter | 10 mm | 6 – 16 |
| Sleeve inner diameter | 8 mm | 3 – 12 |
| Sleeve length | 12 mm | 6 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
