Enclosures and housings
Frame Drone 5 inch 1503 - Slim Long Stretch-X
- Bounding box
- 222.5 × 156.4 × 32 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch 3D print motor 1503, ramping panjang kurus dengan banyak slot dan lubang bergaris seperti gambar referensi, arm hitam ujung bercabang, shell biru dengan pilar baut dan dudukan kamera depan
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor ke tengah arah panjang | 95 mm | 70 – 115 |
| Jarak motor ke tengah arah lebar | 62 mm | 50 – 85 |
| Tebal arm / plat bawah | 5 mm | 3 – 8 |
| Lebar arm di pangkal | 16 mm | 10 – 22 |
| Lebar arm di ujung | 11 mm | 8 – 16 |
| Pola baut motor , cek motor kamu | 12 mm | 9 – 16 |
| Lubang tengah motor | 8 mm | 5 – 12 |
| Panjang body | 130 mm | 100 – 150 |
| Lebar body | 28 mm | 24 – 36 |
| Tinggi ruang stack | 24 mm | 18 – 34 |
| Tebal plat atas | 3 mm | 2 – 4 |
| Pola baut stack FC/ESC | 20 mm | 16 – 30.5 |
| Lebar slot kamera | 20.5 mm | 17 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,