Enclosures and housings
FPV 2.5in Landing Tray
- Bounding box
- 120.0 × 120.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
Solid part for FDM 3D printing, unit mm. Landing tray for 2.5 inch cinewhoop FPV drone. Outer square 120mm × 120mm, bottom plate thickness 4mm. Surrounding low fence, fence height 8mm, fence wall thickness 3.5mm. Center shallow circular mark, diameter 50mm, depth 0.2mm. Two magnet sink holes: diameter 8mm, depth 3mm, do NOT penetrate the bottom plate. Bottom plate grid cutouts, rib width 3mm, grid cell 15mm. Inner connecting flange 30mm width, one M3 through hole on flange, hole diameter 3.2mm. All sharp corners fillet R2. Simple solid, export STEP AP214
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Size | 120 mm | 60 – 200 |
| Bottom Plate Thickness | 4 mm | 2 – 10 |
| Fence Height | 8 mm | 2 – 20 |
| Fence Wall Thickness | 3.5 mm | 1.5 – 8 |
| Center Mark Diameter | 50 mm | 10 – 100 |
| Center Mark Depth | 0.2 mm | 0.1 – 1 |
| Magnet Hole Diameter | 8 mm | 3 – 15 |
| Magnet Hole Depth | 3 mm | 1 – 3.8 |
| Magnet X Offset | 50 mm | 20 – 55 |
| Magnet Y Offset | 0 mm | -40 – 40 |
| Grid Rib Width | 3 mm | 1 – 8 |
| Grid Cell Size | 15 mm | 5 – 30 |
| Grid Edge Margin | 4 mm | 0 – 10 |
| Flange Width | 30 mm | 10 – 60 |
| Flange Inward Depth | 12 mm | 4 – 30 |
| Flange Thickness | 4 mm | 2 – 10 |
| M3 Hole Diameter | 3.2 mm | 2 – 6 |
| Fillet Radius | 2 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no