Enclosures and housings
Formula SAE Dashboard Front Panel
- Bounding box
- 338.3 × 147.0 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- October 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D CAD solid for a Formula SAE combustion car dashboard front panel. Create a symmetric custom-shaped plate, 146.4 mm tall, 330 mm wide at the top, 335 mm wide at the intermediate section, and 338 mm wide at the bottom. Use a gently arched top, rounded shoulders, smooth tapered side transitions, and rounded corners. Do not use an oval or ellipse as the outer shape. Add a centered rectangular display cutout, 183 mm wide and 110 mm tall, with small rounded corners. Add one circular through-hole, diameter 16 mm, on the left side of the display. Add two circular through-holes, each diameter 23 mm, vertically aligned on the right side of the display. Use a provisional uniform plate thickness of 4 mm. Keep the model symmetric and dimensionally editable. Do not add any other features. Generate a valid parametric CAD model with a clear feature history. If a requested dimension cannot be implemented, report the limitation instead of inventing geometry.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Height | 146.4 mm | 60 – 300 |
| Width at Top (shoulders) | 330 mm | 100 – 800 |
| Width at Mid Section | 335 mm | 100 – 800 |
| Width at Bottom | 338 mm | 100 – 800 |
| Height of Mid Section | 88 mm | 10 – 130 |
| Top Arch Rise | 8 mm | 1 – 40 |
| Plate Thickness | 4 mm | 1 – 15 |
| Shoulder Radius | 12 mm | 1 – 30 |
| Bottom Corner Radius | 8 mm | 1 – 25 |
| Display Cutout Width | 183 mm | 40 – 300 |
| Display Cutout Height | 110 mm | 30 – 130 |
| Display Centre Height | 73.2 mm | 30 – 120 |
| Display Corner Radius | 8 mm | 1 – 30 |
| Left Hole Diameter | 16 mm | 3 – 40 |
| Left Hole Offset (from centreline) | 109.5 mm | 30 – 160 |
| Left Hole Height | 73.2 mm | 15 – 135 |
| Right Hole Diameter (x2) | 23 mm | 3 – 50 |
| Right Hole Offset (from centreline) | 112 mm | 30 – 160 |
| Right Hole Vertical Spacing | 70 mm | 25 – 120 |
| Right Hole Pair Centre Height | 73.2 mm | 30 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Rope Winch Drum
Create a fully parametric CAD model of a rope winch drum for a construction hoist. Requirements: - Output format: STEP (.step or .stp) - Units: millimeters - Solid body only (no